Bernina 800DL Manual - Page 8

Removing work. It is essential to bring the take-up lever (8) into its highest position by use of the handwheel when sewing is finished. Raise presser foot by means of the lever at the back of the machine; this will release the top thread tension and the material can be removed easily by pulling to the rear. Thread cutter. The lever on the presser foot bar is made in such a way that it can be used as a thread cutter. This small device helps to save time, especially when scissors are not close at hand. 8 Changing the presser feet - Use the correct presser foot for each type of work. Only in this way will you achieve easy and perfect work. The patented Bernina presser foot clamping lever permits quick and easy changes. The Bernina principle: "Just clip it on!" The work is done in no time. Raise presser foot by using lifting lever Loosen clamping lever and release presser foot rl a- Fix the required presser foot on and push lever downwards. The presser foot is secured and the machine is ready for sewing. Only Bernina has this advantage.