Bernina Bernette 420 Manual - Page 18
Straight, Stitching, Reverse, Removing, Fabric, Presser, Thread, Cutter
View all Bernina Bernette 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
STRAIGHT STITCHING H Set the pattern selector dial lAd as illustrated and the stitch width dial (81 to "0". I he stitch length is controlled with the stitch length dial (C). "r "r While or on the thou gives o suitable stitch length for ordinary purposek the stitch length vanes with the weight of fabric, thickness of thread and putpose of sewing. Generally speaking, the finer the fabric, the finer the thread and shorter C the stitch length, the heavier the fabric, the thicker the throod and longer the stitch length, 11) e 1/4. 2 17 REVERSE STITCHING To finish n scam, push the reverse button and hold it, sewing few stitches backwards. When the button is released the machine sill sew forwards ogain (21 REMOVING FABRIC Raise the thread take up lever to its highest position by tur nirg the hand wheel towards you. Slide the fabric out horn under 'he foot to the Feat of the machine. f3t PRESSER BAR THREAD CUTTER 3 Hold the thread in both /winds behind the presser loot. Centre the TO I throod into the slot "A" and pull down to cut the thread 13)