Bernina Bernette 420 Manual - Page 7
Applicable, Machines, Safety, Manufactured, United, Kingdom, Regulations, Important
View all Bernina Bernette 420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
THIS IS ONLY APPLICABLE TO MACHINES SAFETY MANUFACTURED FOR THE UNITED KINGDOM REGULATIONS IMPORTANT The wares in this mains lead ore coloured in accordance with the following code: BLUE- NEUTRAL BROWN -LIVE NOTE. As the colours of the mains lend of this appliance moy not correspond with the coloured markings identifying the terms nols in your plug, proceed as follows: When leaving the sewing machine unattended, the morns swath mull be switched off or the plug must be removed from the socket outlet When servicing the sewing machine. Or when removing covers or changing lamps, the machine or the electrical set must be disconnected horn the supply by removing the plug from the socket outlet. Connect BROWN wire to terminal marked Lo, coloured RED. Connect BLUE wire to terminal marked N or coloured BLACK. FIT CORRECT PLUG TO POWER CORD WHEN USING A B.S. 1363 FUSED PLUG., A 3 AMP. FUSE MUST BE FITTED. THE MAXIMUM INPUT OF LAMP: 240 V 15 W THIS APPLIANCE CONFORMS TO THE STATUTORY RADIO INTERFERENCE SUPPRESSION REGULATIONS. If the terminals of the plug ore unmarked consult a qualified electrician before use. IMPORTANT The following sofery regulations must be observed without foil: The mow ng needle is a source of danger "risk of filmy to lingers'. The sewing area must, therefore, be kept under constant observation. Manipulations within the area of movement of the needle, such as changing the needle or threading the machine and all manipulations with open covers, must only be performed with the ma(brite switched off (main switch sel to off position). When cleaning or lubricoting the machine or changing the lomp and during interruptions in sewing or after completion of work. the machine must be disconnected from the power supply by pulling out the mains plug. Repairs to the electric section. especially the changing of the lead wire to the foot control unit, may only be carried out by one of our service agencies 6