Binatone BARK 200U User Guide - Page 11
Using the No-Bark Collar
![]() |
View all Binatone BARK 200U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH 3. Using the No-Bark Collar 3.1 Powering On/Off the No-Bark Collar Unit Press and hold the POWER KEY on the No-Bark Collar Unit to power it on or off. The unit will vibrate once to confirm ON and TWICE to confirm OFF. NOTE After powering off the No-Bark Collar Unit, the smart system retains the last programmed correction level that your dog responded to. 3.2 Adjust Correction Level Your No-Bark Collar is a smart bark detection device. If there is a bark from your dog, it releases an ultrasonic sound to discourage or stop your dog from barking (see ""Free" Bark Duration" on page 12). Level 1 2 3 What it does.... Releases audible tone only. Releases ultrasonic sound for 1 second. Releases ultrasonic sound for 3 seconds. The Indicator LED flashes quickly in green and red when releasing ultrasonic sound. 1. Press and hold the ULTRASONIC KEY on the No-Bark Collar Unit for 3 seconds. 2. Short press the ULTRASONIC KEY to adjust the level of correction (from 1 to 3 in cyclic order). The Indicator LED flashes in the following order to indicate the level of correction: Level Indicator LED 1 Flashes in Green 2 Flashes in Amber 3 Flashes in Red 3. Press and hold the ULTRASONIC KEY for another 3 seconds to confirm the level that you have selected on step 2 above. Using the No-Bark Collar 11
![](/manual_guide/products/binatone-bark-200u-user-guide-df48bb4/11.png)