Binatone BARK 200U User Guide - Page 4

How the Shock-Free No-Bark Collar with Dual Sonic Technology works Motorola's No-Bark Collar is a quick, easy and fair way to reduce excessive barking behavior. Whenever the No-Bark Collar detects that your dog is barking, the No-Bark Collar Unit that is worn on your dog releases an unpleasant high-pitched ultrasonic sound to interrupt its barking. Every dog barks, so to be most fair to your pet, we have added unique programming that allows for 5 seconds of "free" barking time, after which the No-Bark Collar Unit will vibrate. Should your dog continue to bark, the unit will emit the ultrasonic correction. If your dog is quiet for two minutes, once again it is offered five more seconds of "free" barking followed by a warning vibration prior to any ultrasonic correction. You can choose from three levels of correction (Level 1 - audible tone only, Level 2 - 1 second of ultrasonic sound, Level 3 - 3 seconds of ultrasonic sound) to match your dog's personality. Our goal is to limit excessive barking, not to attempt to eliminate or suppress all barking. Important guidelines when using the No-Bark Collar • Proper fit is critical to the performance and effectiveness of the No-Bark Collar. If the fit is too loose, the No-Bark Collar Unit will not be able to get sufficient contact with the skin to detect barking and emit ultrasonic sound. If the fit is too tight, it will irritate your dog's skin. • Tighten the No-Bark Collar Unit high on your dog's neck, tight enough that you can get two fingers between the collar strap and your dog. It should not be able to rotate around the neck. • Do not make your dog wear the No-Bark Collar Unit for more than 12 hours continuously to avoid skin irritation. • Do not connect a leash to the No-Bark Collar Unit. • When connecting a separate collar for the leash, make sure that it does not add pressure on the No-Bark Collar Unit.