Binatone Fusion 2815 User Guide - Page 2

5.4 Edit a Phonebook Entry In idle: 1. Press to access the phonebook. 2. Press to select the desired phonebook entry. 3. Press and to select EDIT. 4. Press to display the current name. 5. Edit the name and press . 6. Edit the number and press . 7. Press to select the ringtone and press to confirm. 5.5 Delete a Phonebook Entry In idle: 1. Press to access the phonebook. 2. Press to select the desired phonebook entry. 3. Press and to select DELETE 4. Press to confirm, and the entry will be deleted. 5.6 Delete all Phonebook entries 1. 2. Press Press and tptoh.osneelebcotoDk.ELETE ALL. 3. Press to display . 4. Press to confirm. All entries will be deleted and the display will show . 5.7 Check the Phonebook Usage You can check how many phonebook entries are stored in your handset and how many phonebook entries are available for you to store in the phonebook. 1. Press to access the phonebook. 2. Press and to select PB STATUS. 3. Press to display how much of the phonebook is being used, for example means 14 entries are stored out of the total 20 available spaces. 6 CALLER DISPLAY (NETWORK DEPENDENT) This feature is available if you have subscribed to the Calling Line Identification service with your network service provider. Your phone can store up to 10 received calls with date/time information in the Call List. The number will be shown on the handset display when the phone is ringing. If the number matches with one of the entries in your Private Phonebook, the caller's name stored in the private phonebook will be displayed alternately with the number, and the handset will ring with the ringtone associated with that phonebook entry. 17 If the call is from someone who withheld their number, e.g. by dialling 141, "WITHHELD" will display. If the call is from someone whose number is unavailable, e.g. an international call or from a private exchange, "OUT OF AREA" will display. If you've got new Caller Display records, the handset will display "X NEW CALLS" in standby mode. The New Calls indication will remain until all the new call records have been viewed on that handset. 6.1 View the Call List All received calls are saved in the Call List with the latest call at the top of the list. When the call list is full, the oldest call will be replaced by a new call. Any unanswered calls which have not been viewed are marked with a icon at the centre of the bottom line of the display. 1. Press to access the call list. OR Press and to show CALL LIST, the press OK. 2. Press to select the desired entry. 3. Press to view the caller's number if applicable. 4. Press , to show DETAILS, and then to display the date and time of the call. Press to go back to the previous screen. 6.2 Store a Call List Number into the Phonebook 1. Follow Steps 1 and 2 in Section 6.1. 2. Press and to show ADD TO PB. 3. Press and then enter the name. 4. Press and the selected call list number is displayed. 5. Edit the number if necessary. 6. Press and to select the ringtone. 7. Press to store the phonebook entry and return to the calls list. 6.3 Delete an entry in the Call List 1. Follow Steps 1 and 2 in Section 6.1. 2. Press and to select DELETE. 3. Press to confirm. 6.4 Delete all Call list entries 1. Follow Steps 1 and 2 in Section 6.1 2. Press and to select DELETE ALL. 3. Press to display . 4. Press to confirm. All entries will be deleted and the display will show. 18 7 PHONE SETTINGS Your phone comes with a selection of settings that you can change to personalise your phone the way you like it to work. 7.1 Date and Time Settings If you subscribe to Caller Display the time and date settings will be automatically updated by the network when you receive an incoming call. The Caller Display service only sends the month and date, not the year, so you may need to set the year. 7.1.1 Change the Date Format 1. Press and to select HS SETTINGS. 2. Press and to select DATE & TIME. 3. Press and to select DATE FORMAT. 4. Press and to select your desired date format (DD-MM-YYor MM-DD-YY ). 5. Press to confirm. 7.1.2 Change the Time Format 1. Press and to select HS SETTINGS. 2. Press and to select DATE & TIME. 3. Press and to select TIME FORMAT. 4. Press and to select your desired time format (12 HR or 24 HR). 5. Press to confirm. 7.1.3 Set the Time 1. Press and to select HS SETTINGS. 2. Press and to select DATE & TIME. 3. Press and to select SET TIME. 4. Press and then enter the time information in 24 hour format. 5. Press to confirm. Note: If time has been set before, the current time will display, otherwise, "HH:MM" will display. 7.1.4 Set the Date 1. Press and to select HS SETTINGS. 2. Press and to select DATE & TIME. 3. Press and to select SET DATE. 4. Press and then enter the date information in the format you set in Section 7.1.1. 5. Press to confirm. Note: If date has been set before, the current date will display, otherwise, "DD-MM-YY " will display. 19 7.2 Alarm Settings You can set an alarm time on this phone. When an alarm is set, the alarm icon < > is shown on the handset display.When the alarm time is reached, the alarm icon< > and "ALARM ON" flash on the handset display, and the alarm tone rings for 45 seconds. You can press any key to disable the alarm. If the snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes. You can also press and hold while the alarm is sounding, to stop the alarm and turn off the snooze function. Note: a. A key press will still disable the alarm even if the handset keypad is locked when the alarm rings. b. The alarm volume level is the same as the settings of the handset ringer volume. If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level. c. During an external call or internal call, if an alarm is set and when the alarm time is reached, the < > and "ALARM ON" will still flash. An alarm tone will be emitted from the earpiece to alert the user the alarm time is reached. Once the user presses any key or presses and holds. to disable the alarm, the display will revert to the call duration. d. During paging or ringing, the alarm will not sound when the alarm time is reached. However, if the snooze function is enabled and there is no paging or ringing, the alarm will sound again at the end of the snooze period. 7.2.1 Turn on/off the Alarm 1. Press and to select HS SETTINGS. 2. Press and to select ALARM. 3. Press and to select ON/OFF. 4. Press to confirm. Note: If ON is selected, you will be asked to set the alarm time. 7.2.2 Set the Alarm Time (If Alarm time is set to be ON) 1. Follow Steps 1 to 4 in Section 7.2.1. 2. Enter the alarm time in 24 hour format. 3. Press to display "SNOOZE". 4. Press and to select snooze ON or OFF. 5. Press to confirm. 7.3 Handset Settings 7.3.1 Set the Ringer Melody for Internal Calls 1. Press and to select HS SETTINGS . 2. Press and to select RING SETUP 3. Press and to select INT RING. 4. Press and to select the melody you want to hear for internal calls. Note: The respective melody will be played while browsing the ringtone list. 5. Press to confirm. 20 7.3.2 Set the Ringer Melody for External Calls 1. Press and to select HS SETTINGS. 2. Press and to select RING SETUP. 3. Press and to select EXT RING. 4. Press and to select melody you want to hear for external calls. Note: The respective melody will be played while browsing the ringtone list. 5. Press to confirm. 7.3.3 Set the Ringer Volume 1. Press and to select HS SETTINGS. 2. Press and to select RING SETUP. 3. Press and to select RING VOLUME. 4. Press and to select the desired ringer volume (a total of 6 ringer volume levels including VOLUME OFF). Note: The respective ringer volume will be played during your selection. If VOLUME OFF is selected, the icon will be displayed. 5. Press to confirm. 7.3.4 Set Alert Tones Three different alert tones are set on by default, but can be turned off, if desired. Key Tone - a single beep is emitted when you press a key. Low Battery Tone - emitted while you are talking on the phone to alert you that you need to charge the handset batteries. Out of Range Tone - emitted while you are talking on the phone to alert you to move closer to the base unit, before the call is lost. 1. Press and to select HS SETTINGS. 2. Press and to select TONE SETUP. 3. Press and to select KEY TONE / BATTERY TONE/OUT OF RANGE. 4. Press and to turn on or off these tones. 5. Press to confirm. 7.3.5 Set the Handset Language 1. Press and to select HS SETTINGS. 2. Press and to select LANGUAGE. 3. Press and to select the desired language. 4. Press to confirm. 7.3.6 Rename the Handset 1. Press and to select HS SETTINGS 2. Press and to select RENAME HS. 3. Press and change the name of your handset, using to delete letters and the alphanumeric keys to enter up to 10 letters for the name. 4. Press to confirm. 21 7.3.7 Choose the Information to be Displayed in Idle You can choose to display time or handset name in your idle screen. 1. Press and to select HS SETTINGS. 2. Press and to select HS DISPLAY. 3. Press and to select HANDSET NAME or TIME. 4. Press to confirm. 7.3.8 Set the Auto Answer If you turn on the Auto Answer, you can answer a call automatically by just lifting the handset off the base or charger, without having to press any key. 1. Press and to select HS SETTINGS. 2. Press and to select AUTO ANSWER. 3. Press and to turn on or off the auto answer feature. 4. Press to confirm. 7.4 Base Settings 7.4.1 Set the Base Ringer Melody 1. Press and to select BS SETTINGS. 2. Press and to select BS RINGER. 3. Press and to select the desired melody you want from a choice of 5. Note: The respective ringer melody will be played while browsing the melody list. 4. Press to confirm. 7.4.2 Set the Ringer Volume 1. Press and to select BS SETTINGS. 2. Press and to select RING VOLUME. 3. Press and to select the desired ringer volume (a total of 6 ringer volume levels including VOLUME OFF). Note: The respective ringer volume will be played during your selection. 4. Press to confirm. 7.4.3 De-register a Handset This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be replaced. You will need to enter the 4-digit system PIN (Default PIN is 0000) in order to de-register a handset from the base station. A de-registered handset will have the antenna flashing and REGISTER on the display. Note: You cannot de-register the handset that you are currently using. 1. Press and to select BS SETTINGS. 2. Press and to select DELETE HS. 3. Press and the display shows PIN?---4. Enter the 4-digit system PIN. 5. Press and the first handset number is displayed. 6. Press to step through the list of registered handsets, and select the number of the handset you want to de-register. 22 7.4.2 Change the dial mode You should normally leave the dialling mode at its default setting of TONE (also called DTMF) unless the phone is connected to an old exchange that only recognises PULSE dialling. Note: If PULSE dialling is set, you can press the * key to switch to TONE dialling for the rest of that call. 1. Press and to select BS SETTINGS. 2. Press and to select DIAL MODE. 3. Press and to select TONE or PULSE (The current setting is indicated by an asterisk to the right). 4. Press to confirm. 7.4.3 Change the Flash (Recall) Time You may need to change the recall (flash) time if your phone is connected to a PBX. The recall time options are SHORT (the default value of 100ms), MEDIUM (300ms) or LONG (600ms). 1. Press and to select BS SETTINGS. 2. Press and to select FLASH TIME. 3. Press and to select your desired flash time (SHORT,MEDIUM, LONG, with the current setting indicated by and asterisk to the right). 4. Press to confirm. 7.4.4 Change the System PIN Code A 4-digit system PIN code is used for changing the system settings of the base station. It is used to protect your phone against unauthorised use. The default system PIN code is 0000. 1. Press and to select BS SETTINGS. 2. Press and to select CHANGE PIN. 3. Press and the display shows PIN?-----4. Enter the old system PIN. 5. Press to display NEW PIN?------, and enter your new 4-digit system PIN. 6. Press to display CONFIRM?------, and enter your new 4-digit system PIN again. Note: If the new PIN entered in Step 6 is not the same as the new system PIN again, entered in Step 5, you must enter the new system PIN at step 5 again. 7. Press to confirm 7.5 Registration IMPORTANT: When you purchase your Fusion2815 phone system, all handsets are already registered to your base, so you do not need to register them. Handset registration is only necessary when you buy extra handsets or if a handset has become faulty. You can register additional handsets to have up to five handsets per base unit, with each handset's number (1 to 5) shown on its display. (Note: each handset can only be registered to one base.) To register a new handset to your base: 1. Press and hold on the base station for more than five seconds, to put the base station into registration mode. It will stay in registration mode for about 1 minute, so the following handset sequence must be completed within this time. 2. Press and to select REGISTRATION. 3. Press to display PIN?------. 4. Enter the 4-digit system PIN(default0000). 5. Press to confirm, and the display will show SEARCHING. If the handset registration is successful, you will hear a confirmation tone and the will stop flashing. The handset will automatically be allocated the next available handset number. This handset number is shown in the handset display in standby mode. If the handset registration is unsuccessful, the will still flash. 7.6 Reset Your Phone You can reset your phone to the default settings . After a reset, all your personal settings, call list entries, redial list entries, and answering machine messages will be deleted but your phonebook remains unchanged. 1. Press and to select DEFAULT. 2. Press to display PIN?-----. 3. Enter the 4-digit system PIN(default 0000). 4. Press to display CONFIRM? 5. Press to confirm, and the phone will be reset to its default settings. 8 ANSWERING MACHINE Your phone includes a telephone answering machine that records unanswered calls when it is on.The answering machine can store up to 59 messages within the maximum recording time of approximately 15 minutes. As well as recording incoming messages,you can record memos for other users of your phone. 23 24 If the answering machine memory is full, the Handset will display TAM FULL alternately with the handsets name or time, depending on the handset standby display mode set (see section 7.3.7), and you will have to delete some messages before any new ones can be recorded. The answering machine is controlled and set up using the handset menu functions, as below. 8.1 Turn On/Off the Answering Machine You can turn the answering machine on or off using the handset. When the answering machine is set to ON, calls will be answered after the set answer delay and the caller can then leave you a message. When the answering machine is set to OFF, calls will be answered after 10 rings and the answer only message will be played to your callers. They will not be able to leave you a message. 1. Press and to select ANS. MACHINE. 2. Press and to select TAM ON/OFF. 3. Press and to select ON or OFF. 4. Press to confirm. ¾ If answering machine is set to ON, displays on the handset LCD. ¾ If answering machine is set to OFF, will not display on the handset LCD. 8.2 Listen to the Messages in the Answering Machine When new messages are recorded on the answering machine, the flashes on the handset display until all the new messages are played. After a new message is played it will be saved as an old message automatically unless it is deleted. Old messages will be played after all new messages are played completely. 1. Press and to select ANS. MACHINE. 2. Press and to select MSG PLAYBACK. 3. Press to start message playback through the earpiece and the screen displays the date and time information of the message received. Note: A is placed at the centre of the bottom of the handset display to indicate that it is a new message. When a message has been played, the will disappear and will not be shown when you listen to this message again. Note: If there are no messages, the handset display will briefly show "00-00 00-00" then return to MSG PLAYBACK. 4. During message playback, press or to increase or decrease the message playback volume respectively. 5. Press and to select STOP, FORWARD, PREVIOUS, DELETE to perform the following functions during message playback. STOP: Stop the current message playback and return to the ANS. MACHINE menu. FORWARD: Skip to play the next message. The date and time information of the next message will display if there is another message. PREVIOUS: Repeat playing the current message from the beginning. The date and time information of the current message will display. DELETE: Delete the current message and the next message will be played. Note: Alternatively, you can use the following shortcut keys to control different operations during message playback. Press to stop message playback. Press once to skip to repeat playing the current message from the beginning.Press twice to skip backward to play the previous message. Press to skip to play next message. Press to delete the current message playback. 8.3 Delete All Messages in the Answering Machine 1. Press and to select ANS. MACHINE. 2. Press and to select DELETE ALL. 3. Press to display CONFIRM? 4. Press to delete all old messages. Note: If there are no more messages in the answering machine, "EMPTY "will display and return back to ANS. MACHINE menu. 8.4 Record Memo You can record a memo message for another user. When you record a memo, the message counter will increase by one and the message can be played back in the same way as answering machine messages. Memo recording can still function even when the answering machine is turned off. 1. Press and to select ANS. MACHINE. 2. Press and to select MEMO. 3. Press to start memo recording and "RECORDING " is displayed. 4. Press to stop memo recording and save the memo. OR 4. Press to stop memo recording without saving and return back to ANS. MACHINE menu. 8.5 Answering Machine Settings You can use the TAM SETTINGS menu through the handset to change the settings of your answering machine. 25 26 8.5.1 Set the Answer Mode By default, the answer machine is set in ANS & REC mode which allows callers to leave a message. This mode can be changed to ANSWER ONLY which does not allow callers to leave a message. In that case, your callers will be prompted to call back later. 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select ANSWER MODE. 4. Press and to select ANS & REC or ANSWER ONLY 5. Press to confirm. When your answering machine memory is full and the answer mode is in ANS & RECORD,the answer mode will change to ANSWER ONLY automatically. It will change to ANS & RECORD mode automatically after some messages have been deleted. 8.5.2 Set the Outgoing Message (OGM) Language. The answering machine announces the outgoing message when it answers a call. There is a pre-set OGM for each of ANS & REC mode or ANSWER ONLY mode, which can only be in English or French (Francais) on this model. 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select TAM LANGUAGE. 4. Press and to select your desired OGM language. 5. Press to confirm. 8.5.3 Record Your Own Outgoing Message (OGM) You can record your own OGM for ANS & REC mode or ANSWER ONLY mode. When you record your own OGM, it will be used when the answering machine answers the call. If your personalised OGM is deleted, the pre-set OGM will be restored automatically. 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select OGM SETTINGS. 4. Press and to select ANS & REC or ANSWER ONLY 5. Press and to select RECORD MESS. 6. Press to start recording your personalised OGM and "RECORDING" is displayed on the screen. 7. Press to stop and save your personalised OGM. Your newly saved OGM will playback automatically. Alternatively, press to return to previous screen without saving the personalised OGM. 8.5.4 Playback and Delete the Outgoing Message (OGM) You can playback your own personalised OGM or the pre-set OGM for ANS & REC mode or ANSWER ONLY mode and choose to delete your personalised OGM during playback and record a new one whenever you want. Please note that pre-set OGM cannot be deleted. 27 8.5.4.1 Playback the OGM 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select OGM SETTINGS. 4. Press and to select ANS & REC or ANSWER ONLY. 5. Press and to select PLAYBACK. 6. Press to playback your current OGM and "PLAYING OGM" is displayed on the screen. 7. Press to stop the OGM playback and return to the previous menu. Note: If a personalised OGM has not been recorded, the pre-set OGM will be played. 8.5.4.2 Delete the Personalised OGM 1. Repeat Steps 1 to 6 in Section 8.5.4.1 2. Press while the OGM is playing to delete your personalised OGM and return to the previous menu and the pre-set OGM is restored automatically. Note: If the pre-set OGM is playing, you are not allowed to delete it, so pressing will just stop the playback and return to the previous menu. 8.5.5 Set the Answer Delay You can set the number of rings before the answering machine answers and starts playing your OGM. You can set the answering machine to answer after two to eight rings or TIME SAVER.If Time Saver is set the answering machine will answer after 4 rings if there are no new messages, or after 2 rings if there is a new message, so if you call in and you don't get an answer after 2 or 3 rings, you can hang up and save on call charges. 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. P ress and to select ANSWER DELAY (Available options: 2 RINGS, 4 RINGS, 6 RINGS, 8 RINGS or TIME. SAVER) 4. Press and to select your desired answer delay. 5. Press to confirm. 8.5.6 Set the Recording Time of Incoming Message You can set the maximum length of the recording time of the incoming messages. 1. Press and to select ANS. MACH.INE 2. Press and to select TAM SETTINGS. 3. Press and to select RECORD TIME (Available options: 60S, 120S, 180S, or UNLIMITED) 4. Press and to select your desired recording time. 5. Press to confirm. 28 5 Play the message 6 7 Turn on the answering machine 8 9 Turn off the answering machine Keys 2 4 Functions While message is not playing While message is playing 8.5.7 Call Screening When the answering machine is on and takes a call, you can listen to the caller leaving a message. You can then identify the caller and decide whether to take the call in person. If the answering machine is set to ON, when there is an incoming message, the handset will display "SCREENING?" 1. Press to start call screening. Any Handset can listen to who is leaving the message and decide whether to pick up the call or not. 2. The handset will display"SCREENING". 3. You can adjust the earpiece volume by pressing . OR 3. Press to return to previous screen and you cannot hear the recording. At any time if you want to pick up the call, you can press and the message recording will be stopped automatically. If the answering machine is in the process of recording, the message already stored will be saved. 8.5.8 Change the Compression Rate Three different compression rates (HIGH, MEDIUM and LOW) are provided for you to select different quality levels of recording incoming message. The lower the compression rate, the higher the recording quality level attained, but the shorter the total recording time available. ( LOW=7 minutes, MEDIUM=10 minutes, HIGH=15 minutes approx). 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select COMPRESSION. 4. Press and to select your desired compression rate. 5. Press to confirm. 8.5.9 Activate Remote Access Your phone lets you check your messages, or otherwise operate your answering machine, by calling the answering machine when you are away from home and then dialling a 4-digit remote access PIN from a tone-dialling phone. The 4-digit remote access PIN code is used to prevent other people from unauthorised access of your answering machine. Note: Remote Access must be turned on if you want to be able to use this feature, see 8.5.9.2. 8.5.9.1 Change the 4-Digit Remote Access PIN 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select CHANGE PIN. 4. Press and enter the Old PIN. (Default Remote Access PIN is 0000). 5. Press and enter the New PIN. 6. Press and enter the New PIN again. Note: If the new PIN entered in Step 6 is not the same as the new system PIN entered in Step 5, you must enter the new system PIN at step 5 again. 7. Press to reconfirm. 8.5.9.2 Activate or Deactivate the Remote Access 1. Press and to select ANS. MACHINE. 2. Press and to select TAM SETTINGS. 3. Press and to select REMOTE ACC. 4. Press and to select ON or OFF to turn the remote access on or off respectively. 5. Press to confirm. 8.5.9.3 Access Your Answering Machine Remotely You can ring your phone from another tone-dialling phone to switch the answering machine on or off, and/or listen to your messages remotely. 1. Place a call from a tone-dialling phone to your phone. 2. When the answering machine answers the call and starts playing the OGM, press the key. The OGM will stop playing. 3. Enter the 4-digit Remote Access PIN (default PIN is 0000). You will not hear any confirmation tones or prompts, but you will need to press 5 to start playing any messages. Note: The * must be entered while the OGM is still playing, and the 4-digit PIN should be follow without any delays. Note: If the 4-digit Remote Access PIN is entered incorrectly three times consecutively, the line will be released automatically. 4. Press the following keys to carry out your desired function. .H\V :KLOHPHVVDJHLVQRWSOD\LQJ )XQFWLRQV :KLOHPHVVDJHLVSOD\LQJ    3OD\WKHPHVVDJH   7XUQRQWKHDQVZHULQJPDFKLQH   7XUQRIIWKHDQVZHULQJPDFKLQH 'HOHWHWKHFXUUHQWPHVVDJHSOD\ ing 5HSHDWSOD\LQJWKHFXUUHQWPHVVDJH IURPWKHEHJLQQLQJ3UHVVWZLFHWRVNLS EDFNZDUGWRSOD\WKHSUHYLRXVPHVVDJH 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN 6NLSWRSOD\WKHQH[WPHVVDJH 6WRSWKHFXUUHQWPHVVDJHSOD\EDFN Note: If your answering machine is switched off, the phone will enter into the remote access mode after 14 rings. You can then enter the key and the 4-digit remote access PIN (Default Remote Access PIN is 0000) to activate the remote access feature. 9 TROUBLESHOOTING Problem No dialling tone when pressing key Causes Solutions a. The connection cord of the base station is not plugged in. b. The adapter cord is not plugged in correctly in the base station. c. Another handset is using the base to make a call. d. Wrong telephone line cord a. Check the connections. Unplug and plug back in the mains. Check that the telephone cord has been plugged into the base station and the phone socket. b. Check the base station plug and the 230V plug (remove and plug-in). c. Wait until the line is unoccupied. d. Use the original telephone line cord supplied When connect to a PBX, Dialling prefix is needed. no and/or wrong connection after dialling. Insert the dialling prefix "SEARCHING" is displayed. a. Base station out of range. b. Base station not connected to mains. Reduce the range. Connect base station to mains. The call does not work. Service not activated or wrong setting Check your Subscription with network or change the dial mode. No display. Answering Machine Empty battery Recharge battery The unit does not record new messages. The caller cannot leave a message. The answering machine is turned off. Turn on the answering machine. a. The answering machine a. Turn on the answering machine. is turned off. b. Erase unnecessary messages. b. Message memory is full. c. Change to ANS & REC mode. c. ANSWER ONLY mode is set. I cannot operate the answering machine remotely. a. You are entering the wrong remote access code b. You are pressing the dial keys too quickly. c. You are using a pulse telephone. a. If you forget the remote access code, reset to the default settings. b. Press each key firmly. c. Try again using a touch tone phone. While recording an outgoing A call is being received. message or listening to messages, the unit rings and recording stops. Answer the incoming call and try again to record your out going message later. Please contact the technical support of the network provider for further information. This telephone is not equipped with a grounding function, and therefore some of the functions may be limited when used in PBX systems. Technical Support If the fault persists... Disconnect all otherinstruments connected to the same line as the phone system and try to make a call. Disconnect the baseunit from the telephone line and plug a different phone into the master telephone socket. Try making a call. If this works, the line is OK. If the call does not work,and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the callnow works, theadapter may be faulty. 10 DECLARATION OF CONFORMITY We the manufacturer / Importer : Binatone Telecom Plc, 1 Apsley Way London, NW2 7HF. Declare under our sole responsibility that the following product Type of equipment: Digital cordless telephone Model Name: Country of Origin: Fusion 2815 Series China Brand: Binatone complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the approximation of the laws of the Member States relating to Radio Spectrum Matters, the Council Directive 2004/108/EC on the approximation of the laws of the Member Statesrelating to electromagnetic compatibility (EMC) and the European Community Directive 2006/95/EC relating to Electrical Safety. Assessment of compliance of the product with the requirements relating to the essential requirements according to Article 3 R&TTE was based on Annex III of the Directive 1999/5/EC and the following standard: Radio Spectrum: EMC: Safety: ETSI EN 301406 : V 2.1.1 (2009-07) ETSI EN 301489-6: V1.3.1 (2008-08) ETSI EN 301489-1: V1.8.1 (2008-04) EN60950 -1 : 2006 + A1: 2009 Manufacturer / Importer (signature of authorized person) 21 Apr 2010 Date The conformity to the requirements is validated by the Signature symbol. NOTE: In compliance withDirective 2002/96/EC, when you purchase a product that comes with the symbol shown on the right, you are required to dispose of electrical and electronic equipment by separate waste collection and you cannot dispose of the product as normal waste. This equipment and all its components, subsystems and consumable materials formed an integral part of this product and when you decide to dispose of them you have to takethem to a local recycling centre for appropriate waste disposal, in compliance with the current regulations. Details about the location of these centres can be obtained from your local authority. Notes for battery disposal Your product contains batteries covered by the European Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please be aware of the local rules on separate collection of batteries. The correct disposal of batteries helps protect the environment and prevent health hazards. 11 PRODUCT GUARANTEE This product is guaranteed against manufacturing defects for a period of 1 Year. This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use. In the event of a problem with the product within the guarantee period please return it to your nearest Argos store. If the item is shown to have had an inherent defect present at the time of sale, the store will provide you with a replacement. Your statutory rights remain unaffected. Guarantor; Argos Ltd 489 - 499 Avebury Boulevard Central Milton Keynes MK9 2NW Delete the current message playing. Repeat playing the current message from the beginning. Press twice to skip backward to play the previous message. 29 30 31 32 33 34 UK (Argos) Ver 1, Apr. 2 010 Stop the current message playback Skip to play the next message Stop the current message playback