Binatone MBP30 User Manual

Binatone MBP30 Manual

Binatone MBP30 manual content summary:

  • Binatone MBP30 | User Manual - Page 1
    USER'S GUIDE MBP30 BABY MONITOR USER'S GUIDE The features described in this user's guide are subject to modifications without prior notice.
  • Binatone MBP30 | User Manual - Page 2
    your new Motorola Baby Monitor! Thank you for purchasing the MBP30. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product
  • Binatone MBP30 | User Manual - Page 3
    cover 6. Right / Vol + key 7. Up/Talk key 8. Power/Channel*/Enter key *This function is only available for multi-pack version with more than one camera. Parent unit menu icons Adjust brightness level of the LCD Turn the night vision on or off Adjust the voice activation level Pair Parent
  • Binatone MBP30 | User Manual - Page 4
    unit 1 5 2 7 6 4 3 1. Power LED 2. Infrared LEDs 3. Light sensor 4. Microphone 5. Camera lens 6. On/Off switch 7. Speaker Important guidelines for installing your Baby Monitor • To use your video monitor baby and parent unit together, you must be able to establish a radio link between them
  • Binatone MBP30 | User Manual - Page 5
    ENGLISH Table of contents 1. Safety Instructions 6 2. Getting started 7 2.1 Baby unit power supply 7 2.2 Parent unit battery Installation 8 2.3 Parent unit power supply 9 2.4 Registration 10 3. Using the Baby Monitor MBP30 11 3.1 Setting up 11 3.2 Selecting camera channel (for multi-pack
  • Binatone MBP30 | User Manual - Page 6
    1. Safety Instructions WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use. Therefore, always read the instructions in this User's Guide carefully before using the device. • Adult
  • Binatone MBP30 | User Manual - Page 7
    power supply 1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket (230V/50Hz). NOTE Only use the the ON position. The power LED will light up in green. 3. To switch off the baby unit, slide the power switch to OFF position. Getting started 7
  • Binatone MBP30 | User Manual - Page 8
    2.2 Parent unit battery Installation screw Red Black 1. Turn the belt clip so that it is in the hanging position. 2. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover. 3. Insert the wire tab of the rechargeable battery pack into the contact
  • Binatone MBP30 | User Manual - Page 9
    3. Press and hold to turn OFF the parent unit. NOTE Once the baby and parent units are switched on, the display on the parent unit will show the video captured by the baby unit. When there is no connection or it is out of range,
  • Binatone MBP30 | User Manual - Page 10
    baby monitor is already pre-registered upon your purchase. You do not need to register it again unless the baby unit loses its link with the parent unit. Up to 4 baby units can be registered to one parent unit. If you have more than one baby camera channel ( 1/ 2/ 3/ 4) that you want the baby
  • Binatone MBP30 | User Manual - Page 11
    section "9. Wall mounting instructions" for more details. NOTE Do not place the baby unit within baby's reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. Using the Baby Monitor MBP30 11
  • Binatone MBP30 | User Manual - Page 12
    top right of the display. You will need additional baby units registered to the F parent unit if you wish to monitor different areas using this channel option. To switch between the channels, press . 3.3 Pairing camera channels The enclosed baby unit has already been registered and no setup is
  • Binatone MBP30 | User Manual - Page 13
    camera is placed is not strong enough. 1. Press ( ) 2. Press + - 3. Press to enter menu mode. or until is selected on the LCD screen. or to turn the Baby Unit Night Vision On or Off. The infrared night vision capability on the baby unit will be switched on and off accordingly. MBP30
  • Binatone MBP30 | User Manual - Page 14
    4.3 Voice Activation The sound detection sensitivity level (VOX) of the Baby Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level can be increased so that minor the sound level of the baby reaches the VOX threshold or when any key on the parent unit is pressed. 14
  • Binatone MBP30 | User Manual - Page 15
    of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reliability for your MBP30. However, if something does go wrong, please do not try to repair it yourself -- contact Customer Service for assistance.
  • Binatone MBP30 | User Manual - Page 16
    the unit turned on? Press and release on the parent unit to turn it on. • Is the correct camera channel number selected? Change the camera channel number, if necessary. Registration If the baby unit has lost its link with the parent unit • Try recharging or replacing the battery pack. • If the
  • Binatone MBP30 | User Manual - Page 17
    User's Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at: +44(0) 845 218 0890 in the UK +65(0) and only applies as follows to new Motorola branded Products and Accessories manufactured by Binatone Electronics International LTD., and purchased by
  • Binatone MBP30 | User Manual - Page 18
    OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL WARRANTIES AND MOTOROLA AND BINATONE ELECTRONICS INTERNATIONAL LTD. MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OF IMPLIED. IN NO EVENT SHALL MOTOROLA OR BINATONE ELECTRONICS INTERNATIONAL LTD. BE LIABLE, WHETHER UNDER THIS LIMITED WARRANTY OR IN
  • Binatone MBP30 | User Manual - Page 19
    ENGLISH OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES AND BINATONE ELECTRONICS INTERNATIONAL LTD. SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY CLAIMS OR DEMANDS MADE BY ANY THIRD PARTY OR MADE BY YOU ON BEHALF
  • Binatone MBP30 | User Manual - Page 20
    failure to follow or operate outside the usage parameters stated in the user instructions that came with the Products or Accessories; (c) contact with liquid, water way by someone other than Motorola, Binatone Electronics International LTD. or its authorised service centres, are excluded from
  • Binatone MBP30 | User Manual - Page 21
    +44(0) 845 218 0890 in the UK +65(0) 68412668 in Singapore You will receive instructions on how to ship the Products or Accessories, the shipment of which shall be at your own risk and expense, to a BINATONE ELECTRONICS INTERNATIONAL LTD. Authorised Repair Centre. To obtain service, you must include
  • Binatone MBP30 | User Manual - Page 22
    Technical Specifications Baby unit Frequency Maximum range Image sensor Lens IR LED Power 2.4GHz to 2.4835GHz Extended range up to 450 feet* *Based Unit. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. 22 General Information
  • Binatone MBP30 | User Manual - Page 23
    ENGLISH 9. Wall mounting instructions 1. Use the template below to mark the wall in the correct places to drill holes for wall-mounting screws (not supplied). 4h8hemmeamadmdscsrcerwew 60.00mm (Tolerence 1.0mm) 4h9hem.e5aammddsmcsrcerwew Wall mounting instructions 23
  • Binatone MBP30 | User Manual - Page 24
  • Binatone MBP30 | User Manual - Page 25
    2. Insert 4mm head screws (not supplied) into the holes and tighten the screws. Then, align your baby unit with the screws and push it down. 3. Point the camera lens towards the area you want to monitor. Adjust the baby unit until you are satisfied with the image in the parent unit. Wall mounting
  • Binatone MBP30 | User Manual - Page 26
    Motorola
  • Binatone MBP30 | User Manual - Page 27
    , distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, and other Motorola trademarks and trade dress are owned by Motorola, Inc. and are used under license from Motorola, Inc. MOTOROLA and the Stylized M Logo
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27

USER°S GUIDE
MBP30
BABY MONITOR
USER°S GUIDE
The features described in this user°s guide are subject to
modifications without prior notice.