Binatone MBP30 User Manual - Page 8

2.2 Parent unit battery Installation screw Red Black 1. Turn the belt clip so that it is in the hanging position. 2. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover. 3. Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment. 4. Close the battery compartment and tighten the screw in a F clockwise direction. 5. Press to turn ON the parent unit. The LCD screen illuminates. F - It will take a few seconds for the unit to start up and be ready. 6. Press and hold to turn OFF the parent unit. The battery icon indicates that the battery pack is low and needs to be recharged. The battery pack takes about 16 hours to charge fully. NOTE When the mains power is connected, the charge icon is displayed and the battery icon also displays while the battery is charging. 8 Getting started