Binatone Speakeasy Combo 2005 User Guide - Page 31

8.3.6 Set the Auto Answer If you turn on the Auto Answer, you can answer a call automatically by just lifting the cordless handset off the charger without having to press any key. 1. Press and to select HS SETTINGS. 2. Press and to select AUTO ANSWER. 3. Press and to turn on or off the auto answer feature. 4. Press to confirm. 8.4 Base Settings 8.4.1 De-register a Handset This operation should only be necessary if one of your handsets becomes faulty or lost and needs to be replaced. You will need to enter the 4-digit system PIN in order to de-register a handset from the base station. (The default PIN is 0000.) A de-registered handset will have the antenna icon flashing and REGISTER on the display. Note: You cannot de-register the handset that you are currently using. 1. Press and to select BS SETTINGS. 2. Press and to select DELETE HS. 3. Press to show PIN? 4. Enter the 4-digit system PIN. 5. Press and the first registered handset number is shown. 6. Press to step through the list of registered handsets and select the one that you want to de-register. 7. Press to confirm, and the chosen handset will be de-registered. 8.4.2 Change the Dial Mode You should normally leave the dialling mode at its default setting of TONE (also called DTMF) unless the phone is connected to an old exchange that only recognises PULSE dialling. 1. Press and to select BS SETTINGS. 2. Press and to select DIAL MODE. 3. Press and to select TONE or PULSE. (The current setting is indicated by an asterisk to the right.) 4. Press to confirm. 29