Binatone Terrain 750 User Manual - Page 7
AuxiliaryFeatures, Specifications
View all Binatone Terrain 750 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
5. Setting the Dual Watch Mode Your Terrain 750 is capable of monitoring two channels, the current and another (dual watch) channel. If the unit detects a signal on either channel, it will stop and receive the signal. a. Press the MENU button 11 times , the " DCM " icon will be displayed while "OF" flashes on the LCD Screen. b. Press the UP or DOWN button to select the Dual Watch channel (1-8, except the current channel). c. Press the MENU button to change the CTCSS code. d. Press the UP or DOWN button to select the desired CTCSS code (1-38) e. Press the MENU button to change the DCS code. f. Press the UP or DOWN button to select the desired DCS code (1-83). g. Press the PTT button to confirm your setting. 6. AuxiliaryFeatures 6.1 KeyLock The Key Lock feature allows the user to disable the UP, DOWN and MENU buttons so that the Terrain 750 settings can not be changed accidentally. a. To activate the Key Lock feature, press and hold the MENU button until key lock " "icon appears on the LCD Screen. b. To deactivate the key Lock feature, press and hold the MENU button until key lock " " icon disappears form the LCD Screen. 1RWH The PTT, and CALL buttons will remain functional even if the Key Lock feature is activated. 6.2 Stop watch function a. In Standby Mode, press and hold the CALL button for 3 seconds. The Stop watch icon appears in the LCD screen. b. Press the UP button once to start the Stop watch. To stop, press the UP button again. c. Press the DOWN button once to reset the timer. d. Press and hold the CALL button for 3 seconds to exit from the stopwatch mode. 6.3 LCD Screen Back Light Every time a button is pressed (except PTT and CALL buttons), the LCD Screen back light will illuminate for 5 seconds. 6.4 Microphone/Earphone/Charge Jack The Terrain 750 is equipped with an auxiliary microphone, earphone, and charge jack located at the opposite side to the PTT button. 1RWH It requires a microphone/earphone with a 2.5mm,3-pole jack connector, and this is not supplied with your Terrain 750. 7. Specifications Channels Available Main Channel CTCSS Sub-channel Digital Code channal Output Power (TX) Range 968 Combinations Channels 8 Channels 38 for each Channel 83 for each Channel 0.5 W Up to 8 Kms. 1RWH There are 38 CTCSS sub codes and 83 DCS codes available. Therefore,you can have: 1. Combination of 8 mains channel and 38 CTCSS sub codes - 304 combinations. 2. Combination of 8 mains channel and 83 DCS sub codes - 664 combinations.