Biostar A740GM2 Setup Manual - Page 11
B. Memory Capacity, C. Dual Channel Memory installation
View all Biostar A740GM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
B. Memory Capacity DIMM Socket Location DIMMA1 DIMMB1 DIMMA2 DIMMB2 DDR2 Module 256MB/512MB/1GB/2GB 256MB/512MB/1GB/2GB 256MB/512MB/1GB/2GB 256MB/512MB/1GB/2GB A740G M2+ Total Memory Size Max is 8GB. C. Dual Channel Memory installation To trigger the Dual Channel f unction of the motherboard, the memory module must meet the following requirements: Install memory module of the same density in pairs, shown in the f ollowing table. Dual Channel Status DIMMA1 DIMMB1 DIMMA2 DIMMB2 Enabled O O X X Enabled X X O O Enabled O O O O (O means memory installed, X means memory not installed.) The DRAM bus width of the memory module must be the same (x8 or x16) 9
A740G M2+
9
B. Memory Capacity
DIMM Socket
Location
DDR2 Module
Total Memory
Size
DIMMA1
256MB/512MB/1GB/2GB
DIMMB1
256MB/512MB/1GB/2GB
DIMMA2
256MB/512MB/1GB/2GB
DIMMB2
256MB/512MB/1GB/2GB
Max is 8GB.
C. Dual Channel Memory installation
To trigger the Dual Channel function of the motherboard, the memory module
must meet the following requirements:
Install memory module of the same density in pairs, shown in the following
table.
Dual Channel Status
DIMMA1
DIMMB1
DIMMA2
DIMMB2
Enabled
O
O
X
X
Enabled
X
X
O
O
Enabled
O
O
O
O
(O means memory installed, X means memory not installed.)
The DRAM bus width of the memory module must be the same (x8 or
x16)