Biostar A740GM2 Setup Manual - Page 7
Hardware Installation
![]() |
View all Biostar A740GM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
A740G M2+ CHAPTER 2: HARDWARE INSTALLATION 2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU) Step 1: Remove the socket protection cap. Step 2: Pull the lever toward direction A from the socket and then raise the lever up to a 90-degree angle. Step 3: Look for the white triangle on socket, and the gold triangle on CPU should point towards this white triangle. The CPU will fit only in the correct orientation. 5
![](/manual_guide/products/biostar-a740gm2-setup-manual-063b69e/7.png)
A740G M2+
5
CHAPTER 2: HARDWARE INSTALLATION
2.1
I
NSTALLING
C
ENTRAL
P
ROCESSING
U
NIT
(CPU)
Step 1:
Remove the socket protection cap.
Step 2:
Pull the lever toward direction A from the socket and then raise the
lever up to a 90-degree angle.
Step 3:
Look for the white triangle on socket, and the gold triangle on
CPU should point towards this white triangle. The CPU will fit only
in the correct orientation.