Biostar A740GM2 Bios Setup - Page 10
SuperIO Configuration
![]() |
View all Biostar A740GM2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
A740G M2+ BIOS Manual SuperIO Configuration Advanced BIOS SETUP UTILITY Configure ITE8718 Super IO Chipset Onboard Floppy Controller Serial Port1 Address Parallel Port Address Parallel Port Mode Parallel Port IRQ Keyboard PowerOn Mouse PowerOn Restore on AC Power Loss [Enabled] [3F8/IRQ4] [378] [Normal] [IRQ7] [Disabled] [Disabled] [Power Off] Allows BIOS to Enable or Disable Floppy Controller Select Screen Select Item +- Change Option F1 General Help F10 Save and Exit ESC Exit vxx.xx (C)Copyright 1985-200x, American Megatrends, Inc. Onboard Floppy Controller Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive, select disabled in this field. Options: Enabled (Default) / Disabled Serial Port1 Address Select an address and corresponding interrupt for the first and second serial ports. Options: 3F8/IRQ4 (Default) / 2F8/IRQ3 / 3E8/IRQ4 / 2E8/IRQ3 / Auto / Disabled Parallel Port Address This item allows you to determine access onboard parallel port controller with which I/O Address. Options: 378 (Default) / 278 / 3BC / Disabled Parallel Port Mode This item allows you to determine how the parallel port should function. Options: Normal (Default) Using Parallel port as Standard Printer Port. EPP Using Parallel Port as Enhanced Parallel Port. ECP Using Parallel port as Extended Capabilities Port. ECP+EPP Using Parallel port as ECP & EPP mode. 9
![](/manual_guide/products/biostar-a740gm2-bios-setup-9575a20/10.png)