Biostar GF8200C M2 Bios Setup
Biostar GF8200C M2 Manual
 |
View all Biostar GF8200C M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Biostar GF8200C M2 manual content summary:
- Biostar GF8200C M2 | Bios Setup - Page 1
GF8100 M2+ TE/GF8200C M2+ BIOSManual BIOS Setup 1 1 Main Menu 3 2 Advanced Menu 7 3 PCIPnP Menu 19 4 Boot Menu 22 5 Chipset Menu 24 6 Performance Menu 26 7 Exit Menu 35 i - Biostar GF8200C M2 | Bios Setup - Page 2
GF8100 M2+ TE/GF8200C M2+ BIOSManual BIOS Setup Introduction T he purpose of this manual is to describe the settings in the AMI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to CMOS RAM. T he power of CMOS RAM - Biostar GF8200C M2 | Bios Setup - Page 3
M2+ TE/GF8200C M2+ BIOSManual PCI Bus Support T his AMI BIOS also supports Version 2.3 of the Intel PCI (Peripheral Component Interconn ect) local bus speci fication. DRAM S upport DDR2 SDRAM (Double Data Rate II Synchronous DRAM) is supported. Supported CP Us T his AMI BIOS supports the AMD CPU - Biostar GF8200C M2 | Bios Setup - Page 4
GF8100 M2+ TE/GF8200C M2+ BIOSManual 1 Main Menu Once you enter AMI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system inform ation. Main Advan ced BIOS SETU P U TILITY PCIPnP Boot Chipset Performance Exit System Overvie w AMI BIOS Version - Biostar GF8200C M2 | Bios Setup - Page 5
M2+ TE/GF8200C M2+ BIOSManual Floppy A Select the type of floppy disk drive installed in your system. Options: 1.44M, 3.5 in (Default) / 360K, 5.25 in / 1.2M, 5.25 in / 720K, 3.5 in / 2.88M, 3.5 in / None IDE Configuration T he BIOS menu of detailed options. Main BIOS SETU P U TILITY IDE - Biostar GF8200C M2 | Bios Setup - Page 6
GF8100 M2+ TE/GF8200C M2+ BIOSManual Change the AHCI DID for Linux T his item appears only when SAT A mode is set to AHCI. Options: Disabled (Default) / Enabled Primary IDE Master/Slav e ; SATA 1/2/3/4 Device Main BIOS SETUP UTILITY Primary IDE Master Device : Type [Auto] LBA/Large Mode [ - Biostar GF8200C M2 | Bios Setup - Page 7
GF8100 M2+ TE/GF8200C M2+ BIOSManual DMA Mode Select the DMA mode. Options: Auto (Default) / Disabled S.M.A.R.T or enable device write protection. T his will be effective only if the device is accessed through BIOS. Options: Disabled (Default) / Enabled IDE Detect Time Out (Sec) Select the time out - Biostar GF8200C M2 | Bios Setup - Page 8
M2+ TE/GF8200C M2+ BIOSManual 2 Advanced Menu T he Advanced Menu allows you to configu re the settings of CPU, Super I/O, Power Management, and other system devices. Notice z Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Main Advan ced BIOS - Biostar GF8200C M2 | Bios Setup - Page 9
M2+ TE/GF8200C M2 at boot time and uses the information to better allocate memory and schedule software threads for maximum perform ance. T his ] [Nor mal] [IRQ 7] [Dis abled] [Dis abled] [Pow er Off] Allows BIOS to Enable or Disable Floppy Controller S elect Screen S elect Item +- C hange Option F1 - Biostar GF8200C M2 | Bios Setup - Page 10
GF8100 M2+ TE/GF8200C M2+ BIOSManual Serial Port1 Address Select an address and corresponding interrupt fo r the first and second seri al ports. Options: 3F8/IRQ4 (Default) / 2F8/IRQ3 / 3E8/ - Biostar GF8200C M2 | Bios Setup - Page 11
M2+ TE/GF8200C M2+ BIOSManual Hardware Health Configuration T his item shows the system temperature, fan speed, and voltage information. Advan ced BIOS / Disabled Shutdow n Temperature T his item allows you to set up the CPU shutdown T emperature. Options: Disabled (Default) / 60℃/140℉ / 65℃/149 - Biostar GF8200C M2 | Bios Setup - Page 12
GF8100 M2+ TE/GF8200C M2+ BIOSManual Smart Fan Configuration Advan ced BIOS SETU P U TILITY Smart Fan Conf iguration CPU Smart Fan Smart Fan Cali bration Control Mode Fan Ctrl OFF(o C) Fan Ctrl On(oC ) Fan Ctrl Start value Fan Ctrl Sensi tive [Dis abled] - Biostar GF8200C M2 | Bios Setup - Page 13
GF8100 M2+ TE/GF8200C M2+ BIOSManual Fan Ctrl Start Value When CPU/System temperature arriv es to the set value, the CPU/System fan will work under Smart Fan Function mode. Options: 0~127 (℃) Fan Ctrl Sensitive Increasing the value will raise the speed of CPU/System fan. Options: 1~127 Power - Biostar GF8200C M2 | Bios Setup - Page 14
GF8100 M2+ TE/GF8200C M2+ BIOSManual Chipset ACPI Configuration Advan ced BIOS SETU P U TILITY Chipset ACPI C onfiguration SouthBridge AC PI . Options: S1 (POS) (Default) Power on Suspend S3 (ST R) Suspend to RAM Auto POS+STR Repost Video on S3 Resume Options: NO (Default) / YES ACPI - Biostar GF8200C M2 | Bios Setup - Page 15
M2+ TE/GF8200C M2+ BIOSManual ACPI APIC support T his item is used to enable or disable the motherboard's APIC (Advan ced Programmable Interrupt Controller). T he APIC provides multiprocessor support mode, both BIOS and operating system (e.g. Windows Server 2003) must support headless operation. - Biostar GF8200C M2 | Bios Setup - Page 16
GF8100 M2+ TE/GF8200C M2+ BIOSManual RTC Alarm Date (Days) You can choose which date En abled: Options Enabled Disabled USB 1.1 Contro ller USB 2.0 Contro ller Legacy USB Sup port USB 2.0 Contro ller Mode BIOS EHCI Hand -Off [Ena bled] [Ena bled] [Ena bled] [HiS peed] [Ena bled] > USB Mass Sto - Biostar GF8200C M2 | Bios Setup - Page 17
GF8100 M2+ TE/GF8200C M2+ BIOSManual Legacy USB Support T his item determines if the BIOS should provide legacy support fo r USB devices like the keyboard, mouse, and USB drive. T his is a useful feature when using such USB devices with operating systems that do not natively support USB (e.g. - Biostar GF8200C M2 | Bios Setup - Page 18
GF8100 M2+ TE/GF8200C M2+ BIOSManual Emulation Type T his item allows you to select the emulation type of the USB mass storage device. Options: Auto (Default) / Floppy / Forced FDD / Hard Disk / CDROM AUDIO Configuration Advan ced BIOS SETU P U TILITY AUDIO Configur ation AZALIA AUDIO [Int - Biostar GF8200C M2 | Bios Setup - Page 19
GF8100 M2+ TE/GF8200C M2+ BIOSManual Onboard LAN Configuration Advan ced BIOS SETU P U TILITY Onboard LAN Co nfiguration Onboard LAN Onboard Lan Bo ot ROM MAC ID Informa tion : [Aut o] [Dis abled] Control onboard Lan on/off S elect Screen S elect Item +- C hange Option F1 G eneral Help F10 S - Biostar GF8200C M2 | Bios Setup - Page 20
GF8100 M2+ TE/GF8200C M2+ BIOSManual 3 PCIPnP Menu T his section describes con figuring the PCI bus system. PCI, or Personal Computer Interconn ect, is a system which allows I/O devices to operate at speeds nearing the speed o f the CPU itselfuses when communicating with its own special components - Biostar GF8200C M2 | Bios Setup - Page 21
GF8100 M2+ TE/GF8200C M2+ BIOSManual PCI Latency Timer T his item controls how long a PCI for the built-in driver that allows the onbo ard ID E controller to perform DMA (Direct Memory Access) trans fers. Options: Enabled (Default) / Disabled PCI Resource BIOS SETUP UTILITY PCIPnP PCI Resource - Biostar GF8200C M2 | Bios Setup - Page 22
GF8100 M2+ TE/GF8200C M2+ BIOSManual IRQ3/4/5/7/9/10 automatically. Options: Available (Default) / Reserved Reserved Memory Size T his item allows BIOS to reserve cert ain memory size for speci fic PCI device. Options: Disabled OS which does not support ASPM. Options: Disabled (Default) / Enabled 21 - Biostar GF8200C M2 | Bios Setup - Page 23
GF8100 M2+ TE/GF8200C M2+ BIOSManual 4 Boot Menu T his menu allows you to setup the system boot options. Main Advan ced BIOS SETU P U TILITY PCIPnP Boot Chipset Performance Exit Boot Settings Configuration > Boot Device Priority > Hard Disk Dr ives > Removable Dr ives > CD/DVD Drive s Quick - Biostar GF8200C M2 | Bios Setup - Page 24
GF8100 M2+ TE/GF8200C M2+ BIOSManual CD/DV D Drives T he BIOS will attempt to arrange the CD/DVD drive Disabled AddOn ROM Display Mode T his item sets the display mode for option ROM. Options: Force BIOS (Default) / Keep Current Bootup Num-Lock Selects the NumLock State after the system switched on. - Biostar GF8200C M2 | Bios Setup - Page 25
GF8100 M2+ TE/GF8200C M2+ BIOSManual 5 Chipset Menu T his submenu allows you to configure the speci fic features of the chipset installed on your system. T his chipset manage bus speeds and access to system memory resources, such as DRAM. It also coordinates communications with the PCI bus. - Biostar GF8200C M2 | Bios Setup - Page 26
GF8100 M2+ TE/GF8200C M2+ BIOSManual iGPU and Ext-V GA Selection T his item determines VGA. Options: 256MB (Default) / 32MB / 64MB / 128MB / Disabled PCIE Training Options: Gen2 if supported (Default) / Only Gen1 Iso Flow Control Options: Disabled (Default) / Enabled Hi Priority Channel Options: - Biostar GF8200C M2 | Bios Setup - Page 27
M2+ TE/GF8200C M2+ system to malfunction. Main Advan ced BIOS SETU P U TILITY PCIPnP Boot Chipset Performance Exit Performance Se ttings WARNING: CPU Frequency, MHz [2 00] Processor Freq uency Multiplier [A uto] SB to K8(CPU) Freq Auto [E nabled] SB to K8(CPU) LinkWidth [1 6 16 ] Memory - Biostar GF8200C M2 | Bios Setup - Page 28
GF8100 M2+ TE/GF8200C M2+ BIOSManual Over-Voltage Configuration BIOS SETU P U TILITY Performance Over-Voltage C onfiguration Processor Volt age CPU Over-Volta ge Chipset Over-V oltage HT Over-Voltag e Memory Over-Vo ltage [A uto] [S tartUp] [StartUp] [S tartUp] [1 .95V] Options 1.350V 1.325V 1. - Biostar GF8200C M2 | Bios Setup - Page 29
GF8100 M2+ TE/GF8200C M2+ BIOSManual DRAM Timing Configuration BIOS SETU P U TILITY Performance DRAM Timing Co nfiguration Memory CLK CAS Latency( Tcl) RAS/CAS Dela y(Trcd) Row Precharg e Time(Trp) Min Active R AS(Tras) RAS/RAS Dela y(Trrd) Row Cycle (T rc) Command Rate (CR) > Memory Confi - Biostar GF8200C M2 | Bios Setup - Page 30
M2+ TE/GF8200C M2+ BIOSManual Enable Clock to All DIMMs T his item determines whether the BIOS PCI memory above the total physical memory. Only 64-bit OS supports this manually or automatically regul ate the DRAM T iming. Options: Auto (Default) / DCT0 / DCT1(for AM2+ CPU) / Both(for AM2+ CPU - Biostar GF8200C M2 | Bios Setup - Page 31
GF8100 M2+ TE/GF8200C M2+ BIOSManual TR CD Options: Auto (Default) TRP Options: Auto (Default) tR TP Options: Auto (Default) TR AS Options: Auto (Default) TR C Options: Auto (Default) tWR - Biostar GF8200C M2 | Bios Setup - Page 32
GF8100 M2+ TE/GF8200C M2+ BIOSManual tWRWR Options: Auto (Default) tRDRD Options: Auto (Default) tRFC0 / tRFC1 / tRFC2 / tRFC3 Options: Auto (Default) Spread Spectrum Configuration BIOS SETU P U TILITY Performance Spread Spectru m Configuration CPU/LDT Spread Spectrum PCIE Spread Sp ectrum - Biostar GF8200C M2 | Bios Setup - Page 33
GF8100 M2+ TE/GF8200C M2+ BIOSManual / 5.00% Tri-Center AMD Overclocking Configuration T his item appears only when using AM2+ CPUs. BIOS SETU P U TILITY Performance AMD Overclocki ng Configuration Custom P-State s Core FID Core of AM2+ CPU. Options: x8.0 1600MHz ~ x31.5 6300MHz (Differs by - Biostar GF8200C M2 | Bios Setup - Page 34
M2+ TE/GF8200C M2+ BIOSManual Core VID (for AM2+ CPU) T his function allows you to adjust the voltage of CPU. Options: 0.0125V ~ 1.5500V (differs from CPU). Core DID (for AM2+ CPU) Options: Divided by 1 (Default) / Divided by 2 / Divided by 4 / Divided by 8 / Divided by 16 NB FID (for AM2+ CPU - Biostar GF8200C M2 | Bios Setup - Page 35
GF8100 M2+ TE/GF8200C M2+ BIOSManual MemClock Value Options: 200MHz (Default) / 266 MHz / 333 MHz / 400 MHz / 533 MHz (with AM2+ CPU) MCP PCI-Express Frequenc y, M Hz Options: 100 (MHz) (Default) / 100 ~ 200 34 - Biostar GF8200C M2 | Bios Setup - Page 36
M2+ TE/GF8200C M2+ BIOSManual 7 Exit Menu T his menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Main Advan ced PCIPnP Exit Options Save Changes a nd Exit Discard Change s and Exit Discard Change s Load Optimal D efaults BIOS CMOS RAM and - Biostar GF8200C M2 | Bios Setup - Page 37
GF8100 M2+ TE/GF8200C M2+ BIOSManual Security T his sub-menu allows you to provide/revise supervisor and user password. BIOS SETU P U TILITY Exit Security Setti ngs Supervisor Pas sword :Not Installe d User Password :Not Installe d Change Supervi sor Password User Access Le vel Change User - Biostar GF8200C M2 | Bios Setup - Page 38
GF8100 M2+ TE/GF8200C M2+ BIOSManual Passw ord Check T his item is for setting the timing that checking password. Options: is enabled and an attempt is made to write to the boot sector, BIOS will display a warning message on the screen and sound an alarm beep. Options: Disabled (Default) / Enabled 37
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
 |
 |
GF8100 M2+ TE/GF8200C M2+ BIOS Manual
i
BIOS Setup
.................................................................................................
1
1 Main Menu
...............................................................................................
3
2 Advanced Menu
.......................................................................................
7
3 PCIPnP Menu
........................................................................................
19
4 Boot Menu
..............................................................................................
22
5 Chipset Menu
.........................................................................................
24
6 Performance Menu
...............................................................................
26
7 Exit Menu
...............................................................................................
35