Biostar GF8200C M2 Bios Setup - Page 7
DMA Mode, S.M.A.R.T, 32Bit Data Transfer
View all Biostar GF8200C M2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
GF8100 M2+ TE/GF8200C M2+ BIOSManual DMA Mode Select the DMA mode. Options: Auto (Default) / Disabled S.M.A.R.T Set the Smart Monitoring, Analysis, and Reporting T echnology. Options: Auto (Default) / Disabled / Enabled 32Bit Data Transfer Enable or disable 32-bit data transfer. Options: Enabled (Default) / Disabled Hard Disk Write Protect Disable or enable device write protection. T his will be effective only if the device is accessed through BIOS. Options: Disabled (Default) / Enabled IDE Detect Time Out (Sec) Select the time out value for detecting IDE/SAT A devices. Options: 35 (Default) / 30 / 25 / 20 / 15 / 10 / 5 / 0 6
GF8100 M2+ TE/GF8200C M2+ BIOS Manual
6
DMA Mode
Select the DMA mode.
Options:
Auto (Default) / Disabled
S.M.A.R.T
Set the Smart Monitoring, Analysis, and Reporting Technology.
Options:
Auto (Default) / Disabled / Enabled
32Bit Data Transfer
Enable or disable 32-bit data transfer.
Options:
Enabled (Default) / Disabled
Hard Disk Write Protect
Disable or enable device write protection.
This will be effective only if the device
is accessed through BIOS.
Options:
Disabled (Default) / Enabled
IDE Detect Time Out (Sec)
Select the time out value for detecting IDE/SATA devices.
Options:
35 (Default) / 30 / 25 / 20 / 15 / 10 / 5 / 0