Biostar IDEQ 200TB iDEQ 200T BIOS setup guide - Page 15
Init Display First, On-Chip VGA, On-Chip Frame Buffer Size, Boot Display
View all Biostar IDEQ 200TB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
P4TBA BIOS Setup of the PCI memory address range dedicated for graphics memory address space. Host cycles that hit the aperture range are forwarded to the AGP without any translation. The Choices: 128M (default), 4, 8, 16, 32, 64, 256. Init Display First This item allows you to decide to active whether PCI Slot or on-chip VGA first. The Choices: Onboard/AGP (default), PCI Slot. On-Chip VGA This item allows you to enable or disable the On-Chip VGA. The Choices: Enabled (default), Disabled On-Chip Frame Buffer Size This item allows you to select the Frame Buffer Size. The Choices: 16MB (Default), 1MB, 4MB, 8MB, 32MB. Boot Display This item allows you to select the Boot Display. The Choices: Auto (Default), CRT, TV, EFP. 14
P4TBA BIOS Setup
14
of the PCI memory address range dedicated for graphics memory address space. Host
cycles that hit the aperture range are forwarded to the AGP without any translation.
The Choices: 128M
(default), 4, 8, 16, 32, 64, 256.
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first.
The Choices: Onboard/AGP
(default), PCI Slot.
On-Chip VGA
This item allows you to enable or disable the On-Chip VGA.
The Choices: Enabled
(default), Disabled
On-Chip Frame Buffer Size
This item allows you to select the Frame Buffer Size.
The Choices: 16MB
(Default), 1MB, 4MB, 8MB, 32MB.
Boot Display
This item allows you to select the Boot Display.
The Choices: Auto
(Default), CRT, TV, EFP.