Biostar IDEQ 330G User Manual - Page 11
Installing System Memory, Connectors and Slots - motherboard
View all Biostar IDEQ 330G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
2.5 Installing System Memory DDRA1 DDRB1 Super I/O BIOS Grantsdale-G BAT1 Intel ICH6R Giga LAN IEEE1394 Chip Codec 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. 2.6 Connectors and Slots FDD1: Floppy Disk Connector (optional) The motherboard provides a standard floppy disk connector that supports 360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector supports the provided floppy drive ribbon cables Super I/O BIOS Grantsdale-G BAT1 Intel ICH6R Giga LAN IEEE1394 Chip Codec FDD1 16 15 21 IDE1: Hard Disk Connector The motherboard has a 32-bit Enhanced PCI IDE Controller that provides PIO Mode 0~5, Bus Master, and Ultra DMA 33/ 66/ 100 functionality. Super I/O BIOS Grantsdale-G BAT1 Intel ICH6R Giga LAN IEEE1394 Chip Codec IDE1 2 40 1 39