Biostar IDEQ 330G User Manual - Page 12

PCI 1: Peripheral Component Interconnect Slots This motherboard is equipped with 1 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. Super I/O BIOS Grantsdale-G BAT1 Intel ICH6R Giga LAN IEEE1394 Chip Codec PCI1 PCI-Express x16 slot: Maximum theoretical realized bandwidth of 4GB/s simultaneously per direction, for an aggregate of 8GB/s totally. 4 times the AGP8X graphics solution. Super I/O BIOS Grantsdale-G BAT1 Intel ICH6R Giga LAN IEEE1394 Chip Codec PCI-E x16_1 2.7 How to Setup Jumpers The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is "close", if not, that means the jumper is "open". Pin opened Pin closed 2.8 Detail Setting Pin1-2 closed JATXPWR1: ATX Power Connector This connector allows user to connect 12-pin power connector on the ATX power supply. Super I/O BIOS Grantsdale-G BAT1 Intel ICH6R JATXPWR1 1 6 Pin Assignment 1 +3.3V 2 Ground 3 PW_OK 4 +5B SB Volt. 5 Ground 6 +5V 7 +3.3V 8 Ground 9 PS_ON 10 +12V 11 Ground 12 +5V Giga LAN IEEE1394 Chip Codec 7 12