Biostar K8NHA-M K8NHA M user's manual - Page 14

BIOSTAR Motherboard (8) Wake On LAN Header: JWOL1 (optional) This connector allows you to connect to a LAN card with Wake On LAN function. You can wake up the computer by remote control through a local area network. Pin Assignment 1 +5V_SB 2 Ground 3 Wake up 1 JWOL1 (9) Front USB Header: JUSB1/ (JUSB2: optional) The motherboard provides one/(two) USB 2.0 Pin Header. USB 2.0 technology increases Data transfer rate up to a maximum throughput of 480 Mbps, which is 40 times faster than USB 1.1, and is ideal for connecting high-speed USB interface peripherals such as USB HDD, digital cameras, MP3 players, printers, modems, etc. Pin Assignment Pin Assignment 1 +5V(fused) 2 +5V(fused) 3 USBP-0/(-6) 4 USBP-1/(-7) 2 5 USBP+0/(+6) 6 USBP+1/(+7) 1 7 Ground 8 Ground 9 KEY 10 NC (10) Power Source Selection for USB: JUSBV1/JUSBV2/JUSBV3v (optional) JUSBV1/JUSBV2 JUSBV3 Pin 1-2 close 1 3 Assignment +5V Description JUSBV1: 5V for J1394_USB1 JUSBV2: 5V for JUSBLAN1 JUSBV3: 5V for JUSB1 port. Pin 2-3 close 1 3 +5V Standby Voltage 5V standby to power on. Note: In order to power-on USB devices function, "JUSBV1/JUSBV2/ JUSBV3" jumper cap should be placed on pin 2-3 respectively. (11) Case Open Connector: JCI1 (optional) Pin Assignment 1 Ground 1 2 Case Open Signal English 14