Biostar K8NHA-M K8NHA M user's manual - Page 8
Main Memory, On Board IDE, Chip optional, LAN PHY, Serial ATA Bridge optional
View all Biostar K8NHA-M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
BIOSTAR Motherboard Main Memory * Supports up to two DDR devices. * Supports 200/266/333/400MHz (with ECC) DDR devices. * Maximum memory size is 2GB. Total Memory Size with Unbuffered DIMMs DIMM Socket Location DDR Module Total Memory Size (MB) DDR1 DDR2 64MB/128MB/256MB/512MB/1GB*1 64MB/128MB/256MB/512MB/1GB*1 Max is 2GB ***only for your reference*** On Board IDE * Supports four IDE disk drives. * Supports PIO Mode 5, Bride Mode and Ultra DMA 33/66/100/133 Bus Master Mode. * Supports 1 Serial ATA (SATA) ports. (optional: when using SATA Bridge) - Compliant with SATA 1.0 specification - Data transfer rates up to 150 MB/s 1394 Chip (optional) * Chip: VIA VT6307. * Supports 2 ports with transfer up to 400Mb/s. LAN PHY * Chip: Realtek RTL8201BL. * Supports 10/100 Mb/s operation. * Half/Full duplex operation. * Supports MII interface. Serial ATA Bridge (optional) * Chips: 88I8030 Serial ATA Bridge * Supports both host and device operation. * Selectable maximum speeds of 66/100/133/150 Mb/s. * Ultra low power consumption. * Employs teh latest SATA transceiver (PHY) technology. * Supports SSC. English 8