Biostar M7NCD ULTRA M7NCD Ultra BIOS setup guide - Page 23

M7NCD Ultra BIOS Setup Soft-Off state when the system has "hung." The Choices: Delay 4 Sec, Instant-Off (default). WOL (PME#) From Soft-Off This item allows you to enable or disable the WOL (PME#) From Soft-Off. The Choices: Disabled (Default), Enabled. WOR (RI#) From Soft-Off This item allows you to enable or disable the WOR (RI#) From Soft-Off. The Choices: Disabled (Default), Enabled. S3 Resume by USB (Win98) This item allows you to enable or disable S3 Resume by USB (Win98). The Choices: Disabled (Default), Enabled. Power-On by Alarm This item allows you to enable or disabled power on by alarm. The Choices: Disabled (Default), Enabled. PWRON After PWR-Fail This field determines the action the system will automatically take when power is restored to a system that had lost power previously without any subsequent manual intervention. There are 3 sources that provide current to the CMOS area that retains these Power-On instructions; the motherboard battery (3V), the Power Supply (5VSB), and the Power Supply (3.3V). While AC is not supplying power, the motherboard uses the motherboard battery (3V). If AC power is supplied and the Power Supply is not turned on, 5VSB from the Power Supply is used. When the Power Supply is eventually turned on 3.3V from the Power Supply will be used. There are 3 options: "Former-Sts", "On", "Off". "Former-Sts" "On" "Off" (default) Means to maintain the last status of the CMOS when AC power is lost. Means always set CMOS to the "On" status when AC power is lost Means always set CMOS to the "Off" status when AC power is lost. For example: If set to "Former-Sts" and AC power is lost when system is live, then after AC power is restored, the system will automatically power on. If AC power is lost when system is not live, system will remain powered off. 22