Biostar M7VIT BRAVO M7VIT Bravo user's manual - Page 9
Installing DDR Module - mb
View all Biostar M7VIT BRAVO manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
MM77VVIITT BBrraavvoo CPU Fan Header: JCFAN1 1 Pin 1 JCFAN1 2 3 Assignment Ground +12V FAN RPM rate Sense System Fan Header: JSFAN1 1 Pin 1 JSFAN1 2 3 Assignment Ground +12V FAN RPM rate Sense DDR DIMM Modules: DDR1, DDR2 DRAM Access Time: 2.5V Unbuffered/ Registered DDR 266 MHz (PC2100)/ DDR 333 MHz (PC2700)/ DDR 400 MHz (PC3200) Type required. DRAM Type: 64MB/ 128MB/ 256MB/ 512MB/ 1GB DIMM Module (184 pin) DIMM Socket Location DDR Module Total Memory Size (MB) DDR 1 64MB/128MB/256MB/512MB/1GB *1 Max is DDR 2 64MB/128MB/256MB/512MB/1GB *1 ***Only for reference*** 2GB Installing DDR Module 1. Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM to the slot in the way that the notch of the DIMM matches the break of the slot. 2. Insert the DIMM vertically and firmly into the slot until the retaining chip snap back in place and the DIMM is properly seated. 7