Biostar M7VKH M7VKH user's manual - Page 53
Integrated Peripherals
View all Biostar M7VKH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter2 BIOS Setup 2.5 Integrated Peripherals Figure 5. Integrated Peripherals CMOS Setup Utility-Copyright (C ) 1984-2000 Award Software Integrated Peripherals ► OnChip IDE Control ► Muti-Media setting Init Display First Onboard FDD Controller Onboard Serial Port 1 Onboard Serial Port 2 UART 2 Mode X IR Function Duplex X TX,RX inverting enable Onboard Parallel Port Onboard Parallel Mode X ECP Mode Use DMA X Parallel Port EPP Type Press Enter Press Enter PCI Slot Enabled Auto Auto Standard Half No,Yes 378 / IRQ7 Normal 3 EPP1.9 Item Help Menu Level ► : Move Enter :Select +/-/PU/PD :Value F10 :Save ESC :Exit F1 :General Help F5 :Previous Values F6 :Fail-Safe Defaults F7 : Optimized Defaults OnChip IDE Control The chipset contains a PCI IDE interface with support for two IDE channels. Select "Enabled" to activate the first and/or second IDE interface. Select "Disabled" to deactivate an interface, if you install a primary and/or secondary add-in IDE interface. If you highlight the literal "Press Enter" next to the "Onchip IDE Control" label and then press the enter key, it will take you a submenu with the following options: OnChip IDE Channel 0 The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled to activate the primary IDE interface. Select Disabled to deactivate this interface. The Choices: Enabled (default), Disabled. 2-17