Biostar NF61S-M2 TE Setup Manual - Page 23

Onboard I/O Address

Get Biostar NF61S-M2 TE PDF manuals and user guides View all Biostar NF61S-M2 TE manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

NF61S-M2 TE BIOS Setup MAC LAN This option allows you to control the onboard MAC LAN. The Choices: Auto (default), Disabled. MAC Media Interface This option allows you to control the onboard MAC Media Interface. The Choices: Pin Strap (default), MII, RGMII Onboard LAN Boot ROM This item allows you to enable or disable the Onboard LAN Boot ROM. The Choices: Disabled (default), Enabled. Onboard I/O Address Onboard FDC Controller Select enabled if your system has a floppy disk controller (FDC) installed on the system board and you wish to use it. If you installed another FDC or the system uses no floppy drive, select disabled in this field. The Choices: Enabled (default), Disabled. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
NF61S-M2 TE BIOS Setup
23
MAC LAN
This option allows you to control the onboard MAC LAN.
The Choices: Auto
(default), Disabled.
MAC Media Interface
This option allows you to control the onboard MAC Media Interface.
The Choices: Pin Strap
(default), MII, RGMII
Onboard LAN Boot ROM
This item allows you to enable or disable the Onboard LAN Boot ROM.
The Choices: Disabled
(default), Enabled.
Onboard I/O Address
Onboard FDC Controller
Select enabled if your system has a floppy disk controller (FDC) installed on
the system board and you wish to use it. If you installed another FDC or the
system uses no floppy drive, select disabled in this field.
The Choices: Enabled
(default), Disabled.