Biostar TFORCE 6100 TForce 6100 user's manual - Page 15

Biostar T-Series Clear CMOS Header: JCMOS1 By placing the jumper on pin 2-3, it allows user to restore the BIOS safe setting and the CMOS data, please carefully follow the procedures to avoid damaging the motherboard. TForce 6100-939 TForce 6100 JCMOS1 1 3 1 3 Pin 1-2 Close Normal Operation (Default). 1 3 Pin 2-3 Close Clear CMOS data. ※ Clear CMOS Procedures: 1. Remove AC power line. 2. Set the jumper to "Pin 2-3 Close". 3. Wait for five seconds. 4. Set the jumper to "Pin 1-2 Close". 5. Power on the AC. 6. Reset your desired password or clear the CMOS data. TForce 6100-939/ TForce 6100 Power Source Header for PS/2 Keyboard/Mouse: JKBV1 Pin 1-2 Close: +5V for PS/2 keyboard and mouse.. Pin 2-3 Close: PS/2 keyboard and mouse are powered with +5V standby voltage. TForce 6100-939 JKBMSV1 1 3 1 3 Pin 1-2 Close 1 3 Pin 2-3 Close Note: In order to support this function "Power-on system via keyboard and mouse", "JKBMSV1" jumper cap should be placed on Pin 2-3. 10 User's Manual