Biostar TZ68K Setup Manual - Page 5

TZ68K+ SPEC Clear CMOS Header x1 Restore CMOS data to factory default USB2.0 Connector x3 Each connector supports 2 front panel USB2.0 ports Consumer IR Connector x1 Supports infrared function Printer Port Connector x1 Each connector supports 1 Printer port Serial Port Connector x1 Connects to RS-232 Port S/PDIF out Connector x1 Supports digital audio out function Power Connector (24pin) x1 Connects to Power supply Power Connector (8pin) x1 Connects to Power supply PS/2 Keyboard / Mouse x1 Connects to PS/2 Keyboard / Mouse HDMI Port x1 Connects to HDMI cable VGA Port x1 Connect to D-SUB monitor Back Panel I/O DVI-D Port LAN port USB2.0 Port x1 Connect to DVI monitor x1 Connect to RJ-45 ethernet cable x2 Connect to USB2.0 devices USB3.0 Port x2 Connect to USB3.0 devices (by ASM1042) and USB2.0/USB1.X devices (by Z68) Audio Jack x3 Provide Audio-In/Out and Mic. connection Board Size 230 (W) x 305 (L) mm OS Support Windows XP / Vista / 7 Biostar reserves the right to add or remove support for any OS with or without notice 1.4 REAR PANEL CONNECTORS PS /2 Keyboard / Mouse LAN Line In/ Surround USB2.0X2 HDMI DVI-D VGA USB 3 .0X 2 Line Out Mic In 1/ Bass/ Center NOTE: Any of 2 HDMI / DVI-D / VGA can provide video signals out-put function. NOTE: USB3.0 ports are backward compatible with USB2.0/USB1.X devices. USB3.0 is controlled by ASM1042, but, USB2.0/USB1.X is controlled by Z68. 3