Bissell DeepClean Premier Pet Deep Cleaner 17N4 User's Guide - Page 12
Hard floor cleaning select models only, Machine storage
View all Bissell DeepClean Premier Pet Deep Cleaner 17N4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Operations Hard floor cleaning (select models only) Your DeepClean Premier model may have come with a hard floor attachment and 2X Hard Floor Solutions Formula. If not, these products are available for purchase by contacting the BISSELL Consumer Care department by phone or at the website. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardwood floors. WARNING To reduce the risk of fire and electric shock- when cleaning a hard floor, the BISSELL bare floor tool 160-0208 must be used and it must only be used with BISSELL 2X Hard Floor Solutions cleaning fluid intended for use with this appliance. 1. Vacuum or sweep thoroughly to pick up any loose debris and pet hair. 2. Move any furniture, if needed. 3. Attach the hard floor tool onto the bottom 3. of the machine by hooking it into the nozzle and swinging it down until it clicks into place. 4. Follow instructions on page 7 to fill the 2-in-1 water tank. 5. Plug into an outlet and turn the power switch ON. 6. Slowly move the machine forward and back over hard floor surface one time while depressing trigger. Caution: Do not overwet. 7. Repeat the motion without pressing the trigger using the hard floor tool to squeegee and suction up the dirty water. 8. Allow adequate time for floors to dry. 9. Remove hard floor tool, rinse and dry before storing. Machine storage Once your cleaning is complete, make sure the 2-in-1 water tank is emptied, rinsed out, and dried before the next use. Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be stored where there is a danger of freezing. Freezing will damage internal components and void the warranty. www.bissell.com 12 800.237.7691