Bissell DeepClean Premier Pet Deep Cleaner 17N4 User's Guide - Page 16

Please do, not return, this product, to the store.

Get Bissell DeepClean Premier Pet Deep Cleaner 17N4 PDF manuals and user guides View all Bissell DeepClean Premier Pet Deep Cleaner 17N4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Reduced spray or no spray Possible causes Water tank may be empty Tank may not be seated completely Pump may have lost prime. Remedies Fill heavy duty bladder with hot tap water Turn power OFF. Remove and reseat tank Turn power OFF and then back ON. Wait one minute, then depress trigger The belt is off or broken DirtLifter® PowerBrush Circuit breaker on machine may does not turn have tripped Turn power OFF and unplug unit from outlet. Follow instructions on page 15 Turn the machine OFF and unplug from outlet. Check to see if foreign object is caught in brush roll. Remove object. Plug machine in to reset circuit breaker Cleaner not picking up solution Tank may not be seated properly Pick up the 2-in-1 water tank and re-seat it so it sits snugly on the unit. Tank may not be assembled properly Make sure the tank latches on both sides of the tank are latched properly. To make sure they are both latched properly, pick the tank up by its handle. 2-in-1 water tank is empty Check fluid levels in heavy-duty bladder. 2-in-1 water tank has picked up maximum dirty water and red float door has closed. Empty 2-in-1 water tank. Refill heavy duty bladder with clean hot tap water and replace. Red float "door" in the tank may have closed as a result of bumping object or moving machine back and forth too quickly Turn the machine OFF , allowing red float door to release an into the open position. Turn unit back ON to continue cleaning. Be sure your forward and backward strokes are done at a slower pace. Red lint screen near air duct is dirty Follow cleaning instructions in Step 4 on Page 13. Please do not return this product to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.bissell.com 16 800.237.7691

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
Tr¶bleshꝏting
WARNING
To reduce the risk of electric shock, turn power switch
off and disconnect plug from electrical outlet before
performing maintenance or troubleshooting checks.
Problem
Possible causes
Remedies
Reduced
spray or
no spray
Water tank may be empty
Fill heavy duty bladder with hot
tap water
Tank may not be seated
completely
Turn power OFF. Remove and
reseat tank
Pump may have lost prime.
Turn power OFF and then back ON.
Wait one minute, then depress trigger
DirtLifter®
PowerBrush
does not turn
The belt is off or broken
Turn power OFF and unplug unit
from outlet. Follow instructions on
page 15
Circuit breaker on machine may
have tripped
Turn the machine OFF and unplug
from outlet. Check to see if foreign
object is caught in brush roll.
Remove object. Plug machine in to
reset circuit breaker
Cleaner
not picking
up solution
Tank may not be seated properly
Pick up the 2-in-1 water tank and
re-seat it so it sits snugly on the unit.
Tank may not be assembled
properly
Make sure the tank latches on both
sides of the tank are latched properly.
To make sure they are both latched
properly, pick the tank up by its handle.
2-in-1 water tank is empty
Check fluid levels in heavy-duty
bladder.
2-in-1 water tank has picked up
maximum dirty water and red
float door has closed.
Empty 2-in-1 water tank. Refill heavy
duty bladder with clean hot tap water
and replace.
Red float "door" in the tank may
have closed as a result of bumping
object or moving machine back
and forth too quickly
Turn the machine OFF , allowing red
float door to release an into the open
position. Turn unit back ON to
continue cleaning. Be sure your
forward and backward strokes are
done at a slower pace.
Red lint screen near air duct
is dirty
Follow cleaning instructions in
Step 4 on Page 13.
Other maintenance or service not included in the manual should
be performed by an authorized service representative.
Thank you for selecting a BISSELL product.
For any questions or concerns, BISSELL is happy to
be of service. Contact us directly at 1-800-237-7691.
Please do
not return
this product
to the store.
www.BISSELL.com
800.237.7691
16