Bissell Flip-t Select Hard Floor Cleaner User Guide - English - Page 10

Storing The Flip-It Your Flip It can be stored Ready-to-Use, by leaving water and formula in the unit. Be sure to remove wet Gentle Clean™ Pad before storing. Tip: If the Pleated Filter is rinsed with warm water to clean, it is recommended to leave it out of the unit to air dry before placing it back in the unit. Troubleshooting WARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. Water & Formula are draining out from the clean tank. Possible Causes 1. Clean Tank Black Cap & Valve are not on tight 2. Clean Tank Black Cap & Valve are cross threaded No suction Remedies 1. Remove Black Cap & Value and attach tightly 2. Remove Black Cap & Valve and make sure it is screwed on straight and tightly Possible Causes 1. Filter may be dirty or clogged 2. Wet vacuum nozzle may not be on properly Remedies 1. Remove filter from the Dirty Tank and clean 2. Make sure Wet Vacuum Nozzle is on tight and snapped into place 3. Tank is full 4. Filter is wet 5. Something is caught and clogging the air path 3. Empty Tank 4. Make sure filter is completely dry before placing back into the unit. 5. Unplug unit. Remove Wet Clean Nozzle and insert a blunt object into the air path to remove any potential clog. Water is not flowing Possible Causes 1. Clean Tank is not inserted properly Remedies 1. Remove Tank and reinsert into the unit 10 w w w . b i s s e l l . c o m 800.237.7691 ug603-6704_5200_306.indd 10 3/1/06 11:29:04 AM