Bissell Flip-t Select Hard Floor Cleaner User Guide - English - Page 6
Warning - flip it select hard floor cleaner
View all Bissell Flip-t Select Hard Floor Cleaner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Special Features of Your BISSELL Flip-It Included with the purchase of your Flip It are the following Specialized Cleaning Accessories... The Flip-It was designed to give the user the ability to easily change between the Gentle Clean™ Brushes and Pads. 1. The Gentle Clean™ Brush is recommended for use on Hard Floor surfaces such as tile, vinyl, or surfaces that have grout or crevices where dirt and grime collect. WARNING: Do Not plug in your cleaner until you have completely assembled it per the following instructions and are familiar with all instructions and operating procedures. 2. The Gentle Clean™ Pad is intended for use on more delicate surfaces such as sealed hardwood, laminates or vinyl. 3. The Pleated Filter, located in the lid of the Dirty Tank should be cleaned periodically. WARNING: To reduce the risk of fire, use only BISSELL Hard and Wood Floor Cleaning Solutions in your Flip-It. Use of cleaning formulas which contain lemon or pine oil may damage this appliance and void the warranty. Chemical spot cleaners or solvent based soil removers should not be used. These products may react with the plastic materials used in your Flip-It causing cracking or pitting. Built-In Heater (On 7340 Flip-It Select Models only). To use the Flip-It select's Built-In Heater, push the power switch down. The Heat Indicator Light will come on. Within 25-30 seconds, the flow of water and solution will be 25°F warmer. Tip: Dry Vacuum and Wet Cleaning Off Wet Cleaning using Built-In Heater Putting It Together Assembling your new BISSELL Flip-It is a simple 2 Step Process: NOTE: Remove clean tank from unit first. 1. Insert the Handle into the top of the unit, making sure the Spray Trigger is on the Wet Vacuum side. Make sure the screw opening in the handle is aligned with the hole in the housing of the unit. 2. Insert screw; gently screw in until tight with the body of the unit. With Flip-It Select (7340 model series) you can choose whether or not you want to clean with heated water, based on your flooring type. 1 2 6 www.bissell.com 800.237.7691 ug603-6704_5200_306.indd 6 3/1/06 11:29:00 AM