Bissell Pet Hair Eraser Cordless Hand Vacuum 94V5A User Guide - Page 6

Maintenance and care Cleaning the filter and screen 1. Turn hand vacuum OFF. 2. Unplug hand vacuum from electrical outlet. 3. Press dirt container release latch down to disconnect dirt container and filter assembly from the unit. 4. Remove filter by grasping tabs on both sides of filter frame and pulling away from the dirt container. 5. 5. Separate filter assembly by grasping tabs on both sides of assembly and pull. For best results, periodically tap filter and screen against trash can to remove dirt that has collected on the screen and filter. 6. Reconnect filter and screen by aligning 6. rectangular tab on filter with insert on screen. Press together to ensure assembly is secure. 7. See page 5 to reattach dirt container. NOTE: Dirt container and screen may be rinsed with cold water. Ensure both are dry before reinserting. Do not wash or rinse pleated filter. Storage/Cord wrap system 4. 5a. A wrap is always attached to the cord for quick and easy storage. 1. To store the unit, turn hand vacuum OFF. 2. Unplug hand vacuum from electrical outlet. 3. Bundle cord, using wrap that is located on cord, to store. Nozzle Maintenance Insert Tab Keep nozzles clean and free of debris. 1. Wipe nozzles clean with damp cloth. Troubleshooting Hand vacuum won't turn on Possible causes 1. Power cord not plugged in 2. Blown fuse/tripped breaker in home Remedies 1. Check electrical plug 2. Check/replace fuse or reset breaker Hand Vacuum won't pick up or low suction Possible causes Remedies 1. Dirt container not installed properly 1. Check assembly of dirt container making sure it is snapped in 2. Dirt container is full 2. Empty dirt container and reattach 3. Filter or screen is dirty 3. See instructions above. Replace filter if needed 4. Nozzles are clogged with debris 4. Wipe tools clean with damp cloth 6 www.bissell.ca 800.263.2535