Bissell Pet Hair Eraser Cordless Hand Vacuum User Guide - English - Page 7

Operations 1. 2. Handle positions 3. Press the handle release pedal, located on the lower left side of the vacuum, with your foot to place your vacuum into one of three cleaning positions. 1. Upright - For storage and above floor cleaning with tools. 2. Normal Cleaning - Press handle release pedal once. Position used for most Tip: household floor cleaning tasks. 3. Low Cleaning - With the vacuum in normal cleaning position, press handle release pedal Before cleaning under low furniture, check again. Use for reaching under low furniture such as tables, chairs or beds. area first for objects that might harm the unit or block the vacuum hose. Height adjustment 1. There are seven height settings available for various floor surfaces. Turn the dial on the foot of the cleaner to the desired setting. Lowest setting - For low pile carpet or bare floors. To pick up debris it may be necessary to move up one setting. Medium settings - For medium pile carpet. High setting - For high pile and most shag carpet. Note: For optimal carpet cleaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. If the dial is difficult to turn, tilt the cleaner back slightly to take the weight off the foot while turning. Pet Hair Lifter Use to pick up pet hair from carpeted surfaces. Just vacuum like you normally would. The vacuum will 2. grab pet hair when you pull back and it will release hair and suction it up when you push forward. NOTE: Turn vacuum off before you flip up or flip down the Pet Hair Lifter. 1. To vacuum carpeting, while vacuum is in upright position flip down until it clicks into place on the front of the foot. Turn height adjustment knob to pet hair setting. 2. To vacuum non-carpet surfaces flip up. Push the yellow release button just above the feature, and it will flip up and out of the way. www.bissell.com 800.237.7691 7