Bissell Pet Hair Eraser Lift-Off Upright Pet Vacuum 2087 User Guide - Page 15

Replace Brush and Belt 1 2 3 Unplug and turn vacuum over. Unscrew 10 Phillips head screws to remove bottom cover. Pull roller straight out and slide belt off motor gear. Replace roller and/or belt. 1. Inspect brush roll by placing it on its end and spin. The brush roll should spin freely, multiple times by one flick. If it doesn't, replace brush roll. 2. Inspect belt, replace if it appears damaged. 4 1. Place belt back on brush roll. 2. Pinch belt around brush roll & hook back around the motor gear. 3. Rotate brush roll into place and line up end caps. 4. Re-attach bottom cover with 10 screws. NOTE: If an object becomes lodged in foot and brush shuts off, turn vacuum off and unplug from electrical outlet. Remove obstruction and brush will automatically reset when vacuum is plugged and turned back on. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. www.BISSELL.com 15