Bissell PowerForce Compact 1520 User Guide - Page 14

Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Vacuum cleaner won't run Possible causes Power cord not plugged in Blown fuse/tripped breaker Dirt container is full Filter dirty Hose not secure Dirt container not in place Vacuum path clogged Vacuum cleaner won't pick up dirt Rotating power brush drive belt broken Drive belt stretched Floor brush bristles worn Floor brush jammed Remedies Check electrical plug Check/replace fuse or reset breaker Empty dirt container Check, remove debris or clean Check to be sure hose is snapped into place at both ends Make sure dirt container is completely inserted and snapped into place. Visually check air passageway, hose inlet, and hose for anything that might be obstructing the vacuum path. Carefully remove blockage. Replace drive belt Check drive belt area and remove obstructions. Replace drive belt if necessary Replace floor brush Remove floor brush and clean debris from brush and ends. Check drive belt for any damage. For additional FAQs (Frequently Asked Questions) please visit Customer Support at Bissell.com. Please do not return this product to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. 14 www.BISSELL.com