Bissell PowerFresh Deluxe Steam Mop 1806 User Guide - Page 10

Troubleshooting WARNING To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Problem Reduced steam OR no steam Streaking Leaking Knocking Noise Possible causes Water tank empty Steam level not selected Scented disc tray not installed properly ON/OFF button not pressed Dirty mop pad Use on waxed or oiled floor Mop pad is too wet First use or water tank is empty Remedies Refill tank Select steam level by pushing steam level button Push the scented disc tray all the way into the unit until it's flush Select by pushing the POWER button once and Ready Light illuminates Remove and wash pad per instructions before further use If you have used floor polishes or wax on your floors, steam products may decrease glossiness. Refer to the wax or polish manufacturer. If you don't wax or polish your floors, check the floor care instructions from your flooring manufacturer. Remove and replace with dry mop pad Fill water tank and knocking will diminsh after a few seconds 10 www.BISSELL.com