Bissell PowerFresh Deluxe Steam Mop 1806 User Guide - Page 8

Operations: Cleaning Your Hard Floors NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning with the Powerfresh® Deluxe Steam Mop. YOUR STEAM MOP IS DESIGNED TO CLEAN HARD FLOORING SUCH AS CERAMIC TILE, VINYL, LAMINATE, MARBLE, STONE AND SEALED HARDWOOD FLOORS. USE OF YOUR STEAM MOP ON WAXED OR SOME UNWAXED FLOORS MAY RESULT IN A DIMINISHED GLOSSINESS. THE STEAM MOP IS NOT FOR USE ON UNSEALED FLOORS. FOR BEST RESULTS, TEST IN AN INCONSPICUOUS AREA AND CHECK THE CARE INSTRUCTIONS FROM YOUR FLOORING MANUFACTURER. 1 2 Plug the machine into a properly grounded outlet. 3 To start cleaning your hard floors, turn the machine ON by pressing the POWER button. Once the blinking light turns solid, select the appropriate steam level. 4 Step on the back of the foot to recline the body of the machine to begin cleaning. For overly challenging and stuck-on messes, step on the release pedal located on the back of the machine and lift up to use the SpotBoost Brush™ (see page 7). NOTE: When removing the SpotBoost Brush™, make sure to lift it away from your body as the bottom of the brush will release steam. 5 x3 To be sure to sanitize an area of your floor, use the microfiber cloth pads and slowly and evenly stroke your steam mop back and forth at least three times over the area using continuous steam. For best results, remove the pad and wash after use. 6 When done cleaning, turn off the machine by pressing the POWER button and unplugging the unit. 8 www.BISSELL.com