Bissell ProHeat 2X Revolution Pet Carpet Cleaner 1548 User Guide - Page 16

Maintenance: Cleaning the Brush Rolls 1 2 3 Turn off and unplug the machine from the grounded outlet. Lay the machine down on its back or side. Use the comb to brush out the debris or hair from the brush rolls. Maintenance: Replacing Small Belt, Large Belt, or Brush Rolls What you will need: 1 Phillips screwdriver & 1 flathead screwdriver 1 Unplug the machine. Remove both tanks from the machine. Press the recline pedal and lay the machine on its back. Use a flathead screwdriver to help lift and remove the Belt Access Door. 2 3 Here you should see one (1) belt. This is the Flat Pump Belt. If the Flat Pump Belt is broken, gently remove it from the machine. We will replace this belt in Step 5. Turn the machine on its side. The Power Button should be facing up. Remove the 3 screws on the Belt/Brush Access Plate using a Philips screwdriver. Remove the Access Plate to expose the Brush Cover and Cogged Large Pump Belt. 4 Remove the Brush Cover by lifting straight up. Remove the Cogged Large Pump Belt. The brush rolls can be replaced or cleaned at this time, if needed. 16 www.BISSELL.com