Bissell ProHeat 2X Revolution Pet Carpet Cleaner 1548 User Guide - Page 17
Replacing Small Belt, Large Belt, or Brush Rolls continued
View all Bissell ProHeat 2X Revolution Pet Carpet Cleaner 1548 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Maintenance: Replacing Small Belt, Large Belt, or Brush Rolls (continued) 5 Now, if the Flat Pump Belt was broken, place a new Flat Pump Belt around the red area of the large pulley. Then use your thumb to stretch it toward the back of the machine and transfer it onto the metal axle. 6 Spin either brush. If they both spin, 7 continue to Step 7. If only one spins, the opposite belt is broken and you must remove both brushes and replace the Small Cogged Brush Belt. Place the new belt around both brush gears and slide them onto the thin metal axles. 8 9 To replace the Cogged Large Pump Belt, make sure your Revolution is completely reclined. Begin by wrapping the Cogged Large Pump Belt around the small metal-toothed pulley. While wrapped around the pulley, stretch and wrap around the nearest brush gear. 10 Turn the machine to lay on its back. Return the Brush Cover. Make sure that the brushes are aligned and the cover is secure. Return the Belt/Brush Access Plate to the end of the brush rolls by securing with the 3 screws. Lastly, slide the Belt Access Door back into place. You should hear it "click" into place. www.BISSELL.com 17