Bissell Proheat 2X Pet 1391V User Guide - Page 10
Cleaning with attachments - proheat 2x pet not suctioning
View all Bissell Proheat 2X Pet | 1391V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Operations Cleaning with attachments Your PROheat 2X machine comes equipped with a hose and at least one attachment for cleaning stairs, upholstery, and more. 1. Important! If using to clean upholstery, check upholstery tags. a. Check manufacturer's tag before cleaning. "W" or "WS" on the tag means you can use your PROheat 2X. If the tag is coded with an "X" or an "S" (with a diagonal stripe through it), or says "Dry Clean Only", do not proceed with any deep cleaning machine. Do not use on velvet or silk. If manufacturer's tag is missing or not coded, check with your furniture dealer. b. Check for colorfastness in an inconspicuous place. c. If possible, check upholstery stuffing. Colored stuffing may bleed through fabric when wet. d. Plan activities to allow upholstery time to dry. e. Pick up any loose dirt, debris and pet hair before deep cleaning. 2. Follow the instructions on page 7 for filling the 2-in-1 water tank and the formula tank. 3. Set ReadyTools dial to the "TOOLS" setting. This will allow spray and suction from the hose. 4. Set Custom Clean dial for heavy traffic, normal clean, light clean, or water rinse as desired. 5. Attach the cleaning tool to the end of the hose. 6. Plug in and turn on the power switch and heater (if desired). NOTE: If your deep cleaner came with a Deep Reach Tool or Stain Trapper Tool, do not follow cleaning instructions below. Instead, follow instructions in next section. 7. Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean in the area, working in small sections, until no more dirt can be removed. Rinse (optional) and suction as needed. Caution: Do no overwet. 8. Remove and rinse tools in clean, running water. Dry and replace in the tool caddy. 9. It is recommended that you suction clean water from a bowl to rinse out the hose. 10. Before replacing lift end of hose and stretch out to ensure all water is cleared from hose. 11. Wrap flex hose around the tool caddy. 12. Empty 2-in-1 water tank and rinse out, following the instructions on page 8. 13. Return ReadyTools dial to floor setting. www.BISSELL.com 10 WARNING To reduce the risk of injury, be extra careful when cleaning stairs. Make sure machine is secure and level. gcghchvjbj bAjjhdjfkfshndlfhkdnldlgbghj hjkgvhbvh Manufacturer's tag 5. 10.