Bissell Steam Mop Max User Guide - Page 6
peration, pecial features - replacement pads
View all Bissell Steam Mop Max manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Special features Removable water tank The water tank is located on the back of the Steam Mop Max. It can be refilled with water any time during use. Distilled or demineralized water may be used in place of tap water. Do not use chemicals with your Steam Mop Max. Water purification system This filter removes minerals and other impurities from tap water, preventing water deposits from damaging your Steam Mop Max. It should be replaced when the bright green grains turn blue. To maximize performance of the filter, distilled water may be used. Ready light The ready light will glow when tap water has been converted to steam and the Steam Mop Max is ready to use. Steam on demand trigger Press to release steam. Maneuverable Swivel head Allows you to clean in tight spaces and under cabinets. Deluxe mop pads Reuseable microfiber mop pad is machine washable and safe for all hard floor surfaces. Operation Getting ready The mop pad may have already come attached to the swivel head, if not follow steps 1A and 1B below. 1. Attach mop pad. A. Set swivel head in mop pad, making sure toggle is located on the back. B. Tighten mop pad by pulling on elastic cord while pressing on toggle. 6 www.bissell.com ug120-4108_21H6_709.indd 6 Tip: Do not attempt to use your Steam Mop Max without water in the tank. 800.237.7691 7/10/09 10:34 AM