Bissell Steam Mop Max User Guide - Page 7

Operation Getting ready continued 1A 2. Fill the water tank A. Remove tank by lifting straight up and away from unit. B. Unscrew cap at bottom of water tank and remove the insert assembly. 2A C. Fill water tank with water. For best results, water should be at room temperature. D. Replace insert assembly and cap, tighten until snug. E. Replace water tank by lining up vertical guides and gently sliding tank into place. 3. Twist the quick release cord wrap clockwise to unwrap the power cord completely and plug into a 120-Volt grounded outlet as described on the Important Safety Instructions, page 3. 4. The ready light will illuminate when the Steam Mop Max is ready for use. Before you clean Thoroughly sweep or vacuum floor prior to cleaning with the Steam Mop Max. Cleaning hard floors Your Steam Mop Max is designed to clean hard flooring such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your Steam Mop Max on waxed or some unwaxed floors may result in a diminished glossiness. The Steam Mop Max is not for use on unsealed wood floors. For best results test in an inconspicuous area or check the care instructions from your flooring manufacturer. Cleaning hard floors Your Steam Mop Max is designed to clean hard flooring such as ceramic tile, vinyl, laminate, marble, stone and sealed hard wood floors. Use of your Steam Mop Max on waxed or some unwaxed floors may result in a diminished glossiness. The Steam Mop Max is not for use on unsealed wood floors. For best results test in an inconspicuous area or check the care instructions from your flooring manufacturer. 1B 2B 2E www.bissell.com ug120-4108_21H6_709.indd 7 800.237.7691 7 7/10/09 10:34 AM