Bissell Zing Bagged Canister Vacuum User Guide - English - Page 5

Assembling your vacuum 1. Connect swivel hose by squeezing both tabs and placing in opening on canister. 2. Connect telescoping wand to handle end of hose. Twist slightly to tighten. 1. 3. Connect floor nozzle or combination tool to end of telescoping wand. Twist slightly to tighten. CAUTION: Do not plug in your vacuum until you are familiar with all instructions and operating procedures. 2. 3a. Operations Power cord The power cord is located in the rear of the unit. Pull out the power cord gently, watching for the yellow and red lines. The yellow line indicates that you are getting close to the end. The red line indicates the end of the usable cord. Do not pull the cord out beyond the red line. Your vacuum is equipped with an automatic cord rewind. When cleaning is finished, switch off the power and grasp the plug to disconnect from the electrical outlet. Hold the plug and press the cord rewind button to rewind the cord automatically. Power switch Turn the power on or off by pushing or stepping lightly downward on the power switch ( ). 3b. Power Switch www.bissell.com ug110-4001_7100_507.indd 5 800.237.7691 5 5/22/07 5:01:04 PM