Bissell Zing Bagged Canister Vacuum User Guide - English - Page 9
Warning - manual
View all Bissell Zing Bagged Canister Vacuum manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Troubleshooting Vacuum cleaner won't run Possible causes 1. Vacuum cleaner is not plugged in 2. Household fuse/circuit breaker WARNING: To reduce the risk of electric shock, turn power OFF and disconnect polarized plug from electrical outlet before performing maintenance or troubleshooting. Remedies 1. Check electrical plug 2. Check/replace fuse or circuit breaker Decreasing suction or no suction Possible causes Remedies 1. Floor nozzle, flexible hose, or extension wand is blocked 1. Remove each part and check for blockages 2. Filters are dirty 2. Check both filters and clean or replace as needed 3. Dust bag is full 3. Replace with new dust bag 4. Crack or hole in flexible hose 4. Check hose and replace if needed 5. Hose is clogged 5. Remove hose, check for a clog and clear 6. Air flow regulator or variable suction control is on low suction setting 6. Check for correct setting Cord does not rewind fully Possible causes Remedies 1. Cord may be twisted or wound unevenly 1. Gently pull the cord out and rewind Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.bissell.com ug110-4001_7100_507.indd 9 800.237.7691 9 5/22/07 5:01:22 PM