Bosch B18ID80SRS Installation Instructions - Page 32
Loading the appliance, Attaching, adjusting
View all Bosch B18ID80SRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
In the case of 30" and 36" wide appliances 2 adjacent furniture doors can be attached instead of one large door. These furniture doors must be connected to a metal strip on the rear. This metal strip can be purchased from customer service as an optional accessory, see the section on Optional accessories" on page 17. 20. Attaching the adjusting rail to the furniture door i The adjusting rail is the most important means of adjusting the furniture front. When attaching the metal strip to the furniture doors, observe the maximum possible length of the screws and the position of the drill holes. Always screw into the best loadĆbearing material of the furniture door. Never screw into fillers, decorative strips or similar. i If only one furniture door is to be attached to the door of a 30" or 36" wide appliance, attach the supplied sandwich plate to the adjusting rail and lock into position. 19. Loading the appliance door When attaching the furniture doors, it is recommended to load the door storage compartments in the appliance with weights in order to ensure that the gap width is as precise as possible. Recommendations: 18" Appliance 22 lbs / 10 kg 24" Appliance 33 lbs / 15 kg 30" Appliance 44 lbs / 20 kg q Unscrew the installation support part from the appliance door. i Using the positioning aid, set both longitudinal sides of the furniture door parallel. q Measure the distance X between the adjusting rail and the overhead furniture/fixtures. 32