Bosch B18IF70SLS Installation Instructions - Page 17

Required accessories and tools 1. Supplied accessories - Installation instructions - Operating instructions - Installation kit 2. Optional accessories8. Basic Combination SideĆbyĆSide Sealing kit For permanent connection of two individual appliances, e. g. Freezer next to Refrigerator. Extreme Combination SideĆbyĆSide Heating kit If the gap between the appliances is less than 6" (160 mm). Extra long finger protection part Panel unification part (Metal strip) For connection of two furniture doors. Can be used for standard height furniture doors without further preliminary work. 3. Other required accessories from specialist outlets Ice maker installation kit ¼" OD copper line For connecting appliances which require water, e.g. for an ice maker. i Maximum outer diameter of the water pipe (without fittings): 13/32" (10 mm). - Cutter with adjustable blade - Metal tape measure - Square - Spirit level length 2' (60 cm) and 4' (1,2 m) - MarkingĆout level, length at least 4' (1.2 m) for individual appliances or 7' (2.0 m) for SideĆbyĆSide installation 5. Other - Stepladder - Dolly, hand truck - Hammer drill for drilling holes in wall or floor - Bits according suitable for material and in different sizes - Wooden beam (cross section min. 3" x 4") as an alternative tilt protection, length according to the width of the installation cavity - Wooden screws in different sizes - Thin (max. 1/16" (1.5 mm)), suitable material to protect the floor from damage (e.g. lino) - Suitable material for covering and protecting furniture (e.g. protective sheets) - Adhesive tape 4. Tools - Cordless screwdriver T20 - Torx screwdriver T20 - Torx bit T20 + magnetic holder - 5/16" (8 mm) hex nut driver - Wood drills in different sizes - Open end wrench ½" (SW 13 mm) - Multigrip pliers - Adjustable wrench 17