Bosch B18IF70SLS Installation Instructions - Page 33
Attaching, aligning
View all Bosch B18IF70SLS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
21. Attaching and aligning the furniture door i The double threaded bolts are responsible for adjusting the height of the furniture front. q Hang the furniture door on the double threaded bolt. q Mark this amount X on the rear of the furniture door. q Determine and mark the centerline of the furniture door. q Loosen the 2 nuts and remove the adjusting rail. q Put on the adjusting rail and align along the marks. Mark the drill holes. q Drill the holes. q Screw on the adjusting rail tightly. i Note - Attach the adjusting rail to the furniture door with at least 6 screws. One screw should be inserted under each double threaded bolt. q Align the furniture door with the double threaded bolts (Torx screwdriver). * Wine unit - The adjusting rail features a variety of holes for the many different design options of furniture doors. Always screw into the best loadĆbearing material of the furniture door. q Transfer the middle drill holes along the outer edge of the appliance door to the furniture front and mark. 33