Bosch B24IR70SRS Use & Care Manual - Page 11
Setting, temperature, Super, function, Setup mode
View all Bosch B24IR70SRS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Setting the temperature The temperature can be set from 35 °F to 46 °F (+2 °C to +8 °C). We recommend a setting of 39 °F (+4 °C). The temperature can be changed with the + buttons (warmer) or ć (colder). The temperature can be adjusted in 1 °F (0.5 °C) steps. To adjust the required temperature: q Activate the setup mode with the < or > buttons. The REFRIGERATOR symbol is displayed. q Set the required temperature with the + (warmer) or ć (colder) buttons. i Depending on the model, the appliance can also be switched off or switched to Vacation mode via the temperature setting. When the highest temperature has been reached, off is displayed. Super function To activate setup mode: q Press the setup button. The Super function is ideal for the rapid cooling of drinks and refrigerating large quantities of food. When the Super function is activated, the appliance is cooled as cold as possible to a preset temperature set at the factory for approx. 6 hours. The function is activated by pressing the super button.10. The SUPER $ symbol and the Super temperature are displayed. The first menu (temperature unit) is displayed. To switch to the next menu: The function is ended: - by pressing the super button again - by activating the Eco function - by activating the Vacation mode - by activating the Sabbath mode i After approx. 6 hours the refrigerator automatically switches back to the temperature set before Super function. Setup mode There are several menus for adjusting the appliance functions to individual requirements. These adjustments can be made in Setup mode. q Press the < or > button. The next menu and the current setting (usually on/off) are displayed. To select between the different setting options within one menu: q Press the + or ć button. i A modified setting is saved when the next menu is selected with the < or > button. To end setup mode: q Press the setup button. All modified settings are saved. i If no button is pressed within 12ăseconds, setup mode ends automatically. All modified settings are saved. The required temperature is displayed again. 11