Bosch B24IR70SRS Use & Care Manual - Page 7

Installation, Connection, power, supply - 24

Page 7 highlights

Installation d WARNING d Do not install the appliance: - outdoors, - in an environment with dripping water, - in rooms which are at risk of frost. The appliance is very heavy ć for empty weight see the following table: Refrigerator 24" 310 lbs / 140 kg Refrigerator 30" 350 lbs / 158 kg Installation room The appliance should be installed in a dry, well ventilated room. The ambient temperature should not drop below 55 °F (13 °C) or rise above 110 °F (43 °C), otherwise malfunctions may occur. The installation location should not be exposed to direct sunlight and not placed near a heat source, such as an oven, radiator, etc. If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances from the heat source: - 1.2" (3 cm) from an electric cooker, - 12" (30 cm) from an oil or solidĆfuel cooker. Installation cavity It is important to observe the specified dimensions of the installation cavity for a troubleĆfree installation of the appliance and for the subsequent general view of the furniture front. In particular ensure that the cavity is square. Squareness can be checked by suitable means, e.g. spirit level, diagonal measurements, etc. Furniture/fixtures The new appliance will be mounted securely to adjacent and overhead furniture/fixtures. For this reason it is essential that all attachable furniture/fixtures are connected securely to the base or the wall by suitable means. Base To ensure that the appliance is installed securely and functions properly, the base must be flat and level. The base must be made of a hard, rigid material. The installation area must be the same height as the rest of the room. On account of the heavy weight of a fully loaded appliance, a loadĆbearing base is required. For fullyĆloaded weight see the following table: - Refrigerator 24" 890 lbs / 400 kg - Refrigerator 30" 1110 lbs / 500 kg If in doubt, contact an architect or a building expert. Installing and connecting the appliance d CAUTION d Have the appliance installed by an electrician according to the enclosed installation instructions. After installing the appliance, wait at least before switching on the appliance. During transit the oil in the refrigeration system may have moved. Before switching on the appliance for the first time, clean the inside of the appliance. Connection to the power supply d WARNING d Avoid Electrical Shock Hazard - Plug into a grounded 3 prong outlet. - Do not remove ground prong. - Do not use an adapter. - Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. Improper connection of the equipment grounding conductor may result in electric shock. Have the appliance checked by a qualified electrician or service technician if you are in doubt as to whether the appliance has been properly grounded. The appliance comes with an UL listed, 3Ćwire power supply cord. The appliance requires a 3Ćwire receptacle. The receptacle must be installed by a licensed electrician only. The receptacle must be fitted with a 10A fuse or higher. Please observe in this coherence the following table: Appliance Refrigerator 24" Refrigerator 30" MAX load at one time 2 Ampere 2 Ampere 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62

7
Installation
d
WARNING
d
Do not
install the
appliance:
-
outdoors,
-
in an
environment with
dripping
water,
-
in rooms
which
are at
risk
of
frost.
The
appliance
is
very heavy ć
for
empty weight
see
the
following
table:
Refrigerator 24"
310
lbs
/
140
kg
Refrigerator 30"
350
lbs
/
158
kg
Installation
room
The appliance
should
be
installed
in
a
dry,
well ventilated room.
The
ambient
temperature
should
not
drop
below
55
°
F
(13
°
C) or
rise
above
110
°
F
(43
°
C),
otherwise
malfunctions
may occur.
The
installation
location
should
not
be
exposed to
direct
sunlight
and
not placed near a
heat
source,
such
as
an oven,
radiator,
etc.
If±installation
next
to
a heat
source
is
unavoidable,
use
a
suitable
insulating
plate
or observe
the
following
minimum distances
from
the
heat
source:
-
1.2"
(3
cm) from an
electric
cooker,
-
12"
(30
cm) from an
oil or
solidĆfuel cooker.
Installation
cavity
It is
important
to
observe
the
specified
dimensions
of
the
installation
cavity for a
troubleĆfree
installation
of
the
appliance
and
for
the
subsequent
general view
of
the
furniture front.
In
particular ensure
that
the
cavity is
square.
Squareness
can
be
checked
by
suitable
means,
e.g.
spirit
level,
diagonal measurements,
etc.
Furniture/fixtures
The
new
appliance will be mounted
securely to
adjacent and
overhead
furniture/fixtures.
For
this
reason it is
essential that all
attachable furniture/fixtures are
connected
securely
to
the base or
the
wall by
suitable means.
Base
To
ensure that the appliance is
installed securely
and
functions
properly, the base must be flat and
level.
The
base must be made of
a hard,
rigid
material.
The
installation area must be the
same
height as the rest of
the room.
On
account of
the heavy
weight of
a±fully loaded
appliance,
a±loadĆbearing
base is
required.
For
fullyĆloaded
weight see the
following table:
-
Refrigerator
24" 890
lbs
/
400
kg
-
Refrigerator
30" 1110
lbs
/
500±kg
If
in
doubt, contact an architect or
a±building
expert.
Installing and
connecting the
appliance
d
CAUTION
d
Have
the appliance installed
by
an
electrician according
to
the
enclosed
installation instructions.
After
installing
the appliance, wait at
least
before switching
on the
appliance. During
transit the oil in
the
refrigeration system
may
have
moved.
Before
switching
on the appliance
for
the
first time, clean the inside of
the
appliance.
Connection
to±the
power
supply
d
WARNING
d
Avoid Electrical
Shock
Hazard
- Plug
into
a grounded 3 prong
outlet.
- Do
not remove ground prong.
- Do
not use an adapter.
- Do
not use an extension
cord.
Failure to
follow
these
instructions
can result in death, fire,
or
electrical shock.
Improper
connection of
the
equipment grounding conductor
may
result in electric
shock.
Have±the appliance checked by
a±qualified
electrician or service
technician if
you are in
doubt
as
to
whether
the appliance
has
been properly
grounded.
The appliance comes
with
an
UL
listed, 3Ćwire power
supply cord.
The appliance requires a
3Ćwire
receptacle.
The receptacle must be
installed by
a licensed
electrician only.
The receptacle must be
fitted with
a±10A
fuse or
higher. Please
observe
in this
coherence the following table:
Appliance
MAX load
at one time
Refrigerator
24"
2
Ampere
Refrigerator
30"
2
Ampere