Bosch BSG71360UC Use & Care Manual - Page 7

To release the electric brush, press the snap connector and pull out the telescopic tube. Changing the dust bag Replacing the dust bag If the dust bag change indicator in the cover is completely yellow when the floor tool is lifted off the floor and the highest suction setting is selected, the dust bag must be replaced even if it should not be completely full yet. In this case it is essential to change the dust bag due to the type of material it contains. The nozzles, suction pipe and flexible hose should not be blocked, as this will also trigger the dust bag change indicator. Open the cover by moving the locking lever in the direction of the arrow. Seal and remove the MEGAfilt®SuperTEX dust bag by pulling on the tab as shown. 12 13