Bosch DVR4C1081 Installation Manual - Page 16

DVR4C | Installation Manual | Menu system EN | 16 4.6 System Settings > Use the System Settings menu to get access to those items that are used to configure the system. >> LANGUAGE • A language is selectable from the list with the up/down scroll keys. Press the play key to confirm. >> AUDIO • An audio input can be set to record with its corresponding video input. Audio 1 is mapped to video 1, audio 2 to video 2, audio 3 to video 3 and audio 4 to video 4. • For a Quad screen display in live mode, the 4 audio channels are mixed. For a Quad screen display in playback mode, no audio is played back. Audio is only played back in forward, real-time and full screen playback. • Audio monitoring, recording and gain can be configured per profile for each channel in the table. >> TEXT • The DVR can record and display ASCII data on the monitor. The external device can be a text input device. >>> MONITORING • Set On to display live text data on a monitor. Text is overlayed on the live image. >>> SYNC TEXT WITH • Select All to display (and record) text data on all channels (in a quad screen display, text appears in the upper-left channel.) Text can also be displayed (and recorded) with a specific channel only. >>> SEEK HEADER • If the text device sends a header, set to On. • If a header is sent, select a single or a double line header. >>> DELIMITER • If the text device sends an end-of-line delimiter, enter its value. >>> TIMEOUT • If the text device does not send a delimiter, the text is recorded as a single block. Enter the time (in milliseconds) that must expire after the last received character to separate text blocks. >>> LINES • If the text device does not send a delimiter or use a timeout, enter the number of lines to be used for a single block of text. >> CONNECTIVITY The Connectivity menu gives access to settings that control the behavior of the unit with respect to all external devices or a network. >>> RECORDING • Set On to record text data on the hard disk of the DVR. Text is recorded separately from images, but is synchronized based on time information. >>> NETWORK • Select the type of connection; Ethernet or xDSL. • Set DHCP to On to have IP address, subnet mask and default gateway assigned automatically by the network DHCP server. Bosch Security Systems | Version 1.1